Table of Contents
A low-level client representing AWS OpsWorks CM (OpsWorksCM)
AWS OpsWorks for configuration management (CM) is a service that runs and manages configuration management servers. You can use AWS OpsWorks CM to create and manage AWS OpsWorks for Chef Automate and AWS OpsWorks for Puppet Enterprise servers, and add or remove nodes for the servers to manage.
Glossary of terms
Endpoints
AWS OpsWorks CM supports the following endpoints, all HTTPS. You must connect to one of the following endpoints. Your servers can only be accessed or managed within the endpoint in which they are created.
For more information, see AWS OpsWorks endpoints and quotas in the AWS General Reference.
Throttling limits
All API operations allow for five requests per second with a burst of 10 requests per second.
import boto3
client = boto3.client('opsworkscm')
These are the available methods:
Associates a new node with the server. For more information about how to disassociate a node, see DisassociateNode .
On a Chef server: This command is an alternative to knife bootstrap .
Example (Chef): aws opsworks-cm associate-node --server-name *MyServer* --node-name *MyManagedNode* --engine-attributes "Name=*CHEF_ORGANIZATION* ,Value=default" "Name=*CHEF_NODE_PUBLIC_KEY* ,Value=*public-key-pem* "
On a Puppet server, this command is an alternative to the puppet cert sign command that signs a Puppet node CSR.
Example (Puppet): aws opsworks-cm associate-node --server-name *MyServer* --node-name *MyManagedNode* --engine-attributes "Name=*PUPPET_NODE_CSR* ,Value=*csr-pem* "
A node can can only be associated with servers that are in a HEALTHY state. Otherwise, an InvalidStateException is thrown. A ResourceNotFoundException is thrown when the server does not exist. A ValidationException is raised when parameters of the request are not valid. The AssociateNode API call can be integrated into Auto Scaling configurations, AWS Cloudformation templates, or the user data of a server's instance.
See also: AWS API Documentation
Request Syntax
response = client.associate_node(
ServerName='string',
NodeName='string',
EngineAttributes=[
{
'Name': 'string',
'Value': 'string'
},
]
)
[REQUIRED]
The name of the server with which to associate the node.
[REQUIRED]
The name of the node.
[REQUIRED]
Engine attributes used for associating the node.
Attributes accepted in a AssociateNode request for Chef
Attributes accepted in a AssociateNode request for Puppet
A name and value pair that is specific to the engine of the server.
The name of the engine attribute.
The value of the engine attribute.
dict
Response Syntax
{
'NodeAssociationStatusToken': 'string'
}
Response Structure
(dict) --
NodeAssociationStatusToken (string) --
Contains a token which can be passed to the DescribeNodeAssociationStatus API call to get the status of the association request.
Exceptions
Check if an operation can be paginated.
Creates an application-level backup of a server. While the server is in the BACKING_UP state, the server cannot be changed, and no additional backup can be created.
Backups can be created for servers in RUNNING , HEALTHY , and UNHEALTHY states. By default, you can create a maximum of 50 manual backups.
This operation is asynchronous.
A LimitExceededException is thrown when the maximum number of manual backups is reached. An InvalidStateException is thrown when the server is not in any of the following states: RUNNING, HEALTHY, or UNHEALTHY. A ResourceNotFoundException is thrown when the server is not found. A ValidationException is thrown when parameters of the request are not valid.
See also: AWS API Documentation
Request Syntax
response = client.create_backup(
ServerName='string',
Description='string',
Tags=[
{
'Key': 'string',
'Value': 'string'
},
]
)
[REQUIRED]
The name of the server that you want to back up.
A map that contains tag keys and tag values to attach to an AWS OpsWorks-CM server backup.
A map that contains tag keys and tag values to attach to an AWS OpsWorks for Chef Automate or AWS OpsWorks for Puppet Enterprise server. Leading and trailing white spaces are trimmed from both the key and value. A maximum of 50 user-applied tags is allowed for tag-supported AWS OpsWorks-CM resources.
A tag key, such as Stage or Name . A tag key cannot be empty. The key can be a maximum of 127 characters, and can contain only Unicode letters, numbers, or separators, or the following special characters: + - = . _ : /
An optional tag value, such as Production or test-owcm-server . The value can be a maximum of 255 characters, and contain only Unicode letters, numbers, or separators, or the following special characters: + - = . _ : /
dict
Response Syntax
{
'Backup': {
'BackupArn': 'string',
'BackupId': 'string',
'BackupType': 'AUTOMATED'|'MANUAL',
'CreatedAt': datetime(2015, 1, 1),
'Description': 'string',
'Engine': 'string',
'EngineModel': 'string',
'EngineVersion': 'string',
'InstanceProfileArn': 'string',
'InstanceType': 'string',
'KeyPair': 'string',
'PreferredBackupWindow': 'string',
'PreferredMaintenanceWindow': 'string',
'S3DataSize': 123,
'S3DataUrl': 'string',
'S3LogUrl': 'string',
'SecurityGroupIds': [
'string',
],
'ServerName': 'string',
'ServiceRoleArn': 'string',
'Status': 'IN_PROGRESS'|'OK'|'FAILED'|'DELETING',
'StatusDescription': 'string',
'SubnetIds': [
'string',
],
'ToolsVersion': 'string',
'UserArn': 'string'
}
}
Response Structure
(dict) --
Backup (dict) --
Backup created by request.
BackupArn (string) --
The ARN of the backup.
BackupId (string) --
The generated ID of the backup. Example: myServerName-yyyyMMddHHmmssSSS
BackupType (string) --
The backup type. Valid values are automated or manual .
CreatedAt (datetime) --
The time stamp when the backup was created in the database. Example: 2016-07-29T13:38:47.520Z
Description (string) --
A user-provided description for a manual backup. This field is empty for automated backups.
Engine (string) --
The engine type that is obtained from the server when the backup is created.
EngineModel (string) --
The engine model that is obtained from the server when the backup is created.
EngineVersion (string) --
The engine version that is obtained from the server when the backup is created.
InstanceProfileArn (string) --
The EC2 instance profile ARN that is obtained from the server when the backup is created. Because this value is stored, you are not required to provide the InstanceProfileArn again if you restore a backup.
InstanceType (string) --
The instance type that is obtained from the server when the backup is created.
KeyPair (string) --
The key pair that is obtained from the server when the backup is created.
PreferredBackupWindow (string) --
The preferred backup period that is obtained from the server when the backup is created.
PreferredMaintenanceWindow (string) --
The preferred maintenance period that is obtained from the server when the backup is created.
S3DataSize (integer) --
This field is deprecated and is no longer used.
S3DataUrl (string) --
This field is deprecated and is no longer used.
S3LogUrl (string) --
The Amazon S3 URL of the backup's log file.
SecurityGroupIds (list) --
The security group IDs that are obtained from the server when the backup is created.
ServerName (string) --
The name of the server from which the backup was made.
ServiceRoleArn (string) --
The service role ARN that is obtained from the server when the backup is created.
Status (string) --
The status of a backup while in progress.
StatusDescription (string) --
An informational message about backup status.
SubnetIds (list) --
The subnet IDs that are obtained from the server when the backup is created.
ToolsVersion (string) --
The version of AWS OpsWorks CM-specific tools that is obtained from the server when the backup is created.
UserArn (string) --
The IAM user ARN of the requester for manual backups. This field is empty for automated backups.
Exceptions
Creates and immedately starts a new server. The server is ready to use when it is in the HEALTHY state. By default, you can create a maximum of 10 servers.
This operation is asynchronous.
A LimitExceededException is thrown when you have created the maximum number of servers (10). A ResourceAlreadyExistsException is thrown when a server with the same name already exists in the account. A ResourceNotFoundException is thrown when you specify a backup ID that is not valid or is for a backup that does not exist. A ValidationException is thrown when parameters of the request are not valid.
If you do not specify a security group by adding the SecurityGroupIds parameter, AWS OpsWorks creates a new security group.
Chef Automate: The default security group opens the Chef server to the world on TCP port 443. If a KeyName is present, AWS OpsWorks enables SSH access. SSH is also open to the world on TCP port 22.
Puppet Enterprise: The default security group opens TCP ports 22, 443, 4433, 8140, 8142, 8143, and 8170. If a KeyName is present, AWS OpsWorks enables SSH access. SSH is also open to the world on TCP port 22.
By default, your server is accessible from any IP address. We recommend that you update your security group rules to allow access from known IP addresses and address ranges only. To edit security group rules, open Security Groups in the navigation pane of the EC2 management console.
To specify your own domain for a server, and provide your own self-signed or CA-signed certificate and private key, specify values for CustomDomain , CustomCertificate , and CustomPrivateKey .
See also: AWS API Documentation
Request Syntax
response = client.create_server(
AssociatePublicIpAddress=True|False,
CustomDomain='string',
CustomCertificate='string',
CustomPrivateKey='string',
DisableAutomatedBackup=True|False,
Engine='string',
EngineModel='string',
EngineVersion='string',
EngineAttributes=[
{
'Name': 'string',
'Value': 'string'
},
],
BackupRetentionCount=123,
ServerName='string',
InstanceProfileArn='string',
InstanceType='string',
KeyPair='string',
PreferredMaintenanceWindow='string',
PreferredBackupWindow='string',
SecurityGroupIds=[
'string',
],
ServiceRoleArn='string',
SubnetIds=[
'string',
],
Tags=[
{
'Key': 'string',
'Value': 'string'
},
],
BackupId='string'
)
A PEM-formatted HTTPS certificate. The value can be be a single, self-signed certificate, or a certificate chain. If you specify a custom certificate, you must also specify values for CustomDomain and CustomPrivateKey . The following are requirements for the CustomCertificate value:
[REQUIRED]
The configuration management engine to use. Valid values include ChefAutomate and Puppet .
Optional engine attributes on a specified server.
Attributes accepted in a Chef createServer request:
Attributes accepted in a Puppet createServer request:
A name and value pair that is specific to the engine of the server.
The name of the engine attribute.
The value of the engine attribute.
[REQUIRED]
The name of the server. The server name must be unique within your AWS account, within each region. Server names must start with a letter; then letters, numbers, or hyphens (-) are allowed, up to a maximum of 40 characters.
[REQUIRED]
The ARN of the instance profile that your Amazon EC2 instances use. Although the AWS OpsWorks console typically creates the instance profile for you, if you are using API commands instead, run the service-role-creation.yaml AWS CloudFormation template, located at https://s3.amazonaws.com/opsworks-cm-us-east-1-prod-default-assets/misc/opsworks-cm-roles.yaml. This template creates a CloudFormation stack that includes the instance profile you need.
[REQUIRED]
The Amazon EC2 instance type to use. For example, m5.large .
The start time for a one-hour period each week during which AWS OpsWorks CM performs maintenance on the instance. Valid values must be specified in the following format: DDD:HH:MM . MM must be specified as 00 . The specified time is in coordinated universal time (UTC). The default value is a random one-hour period on Tuesday, Wednesday, or Friday. See TimeWindowDefinition for more information.
Example: Mon:08:00 , which represents a start time of every Monday at 08:00 UTC. (8:00 a.m.)
The start time for a one-hour period during which AWS OpsWorks CM backs up application-level data on your server if automated backups are enabled. Valid values must be specified in one of the following formats:
MM must be specified as 00 . The specified time is in coordinated universal time (UTC). The default value is a random, daily start time.Example: 08:00 , which represents a daily start time of 08:00 UTC.
Example: Mon:08:00 , which represents a start time of every Monday at 08:00 UTC. (8:00 a.m.)
A list of security group IDs to attach to the Amazon EC2 instance. If you add this parameter, the specified security groups must be within the VPC that is specified by SubnetIds .
If you do not specify this parameter, AWS OpsWorks CM creates one new security group that uses TCP ports 22 and 443, open to 0.0.0.0/0 (everyone).
[REQUIRED]
The service role that the AWS OpsWorks CM service backend uses to work with your account. Although the AWS OpsWorks management console typically creates the service role for you, if you are using the AWS CLI or API commands, run the service-role-creation.yaml AWS CloudFormation template, located at https://s3.amazonaws.com/opsworks-cm-us-east-1-prod-default-assets/misc/opsworks-cm-roles.yaml. This template creates a CloudFormation stack that includes the service role and instance profile that you need.
The IDs of subnets in which to launch the server EC2 instance.
Amazon EC2-Classic customers: This field is required. All servers must run within a VPC. The VPC must have "Auto Assign Public IP" enabled.
EC2-VPC customers: This field is optional. If you do not specify subnet IDs, your EC2 instances are created in a default subnet that is selected by Amazon EC2. If you specify subnet IDs, the VPC must have "Auto Assign Public IP" enabled.
For more information about supported Amazon EC2 platforms, see Supported Platforms .
A map that contains tag keys and tag values to attach to an AWS OpsWorks for Chef Automate or AWS OpsWorks for Puppet Enterprise server.
A map that contains tag keys and tag values to attach to an AWS OpsWorks for Chef Automate or AWS OpsWorks for Puppet Enterprise server. Leading and trailing white spaces are trimmed from both the key and value. A maximum of 50 user-applied tags is allowed for tag-supported AWS OpsWorks-CM resources.
A tag key, such as Stage or Name . A tag key cannot be empty. The key can be a maximum of 127 characters, and can contain only Unicode letters, numbers, or separators, or the following special characters: + - = . _ : /
An optional tag value, such as Production or test-owcm-server . The value can be a maximum of 255 characters, and contain only Unicode letters, numbers, or separators, or the following special characters: + - = . _ : /
dict
Response Syntax
{
'Server': {
'AssociatePublicIpAddress': True|False,
'BackupRetentionCount': 123,
'ServerName': 'string',
'CreatedAt': datetime(2015, 1, 1),
'CloudFormationStackArn': 'string',
'CustomDomain': 'string',
'DisableAutomatedBackup': True|False,
'Endpoint': 'string',
'Engine': 'string',
'EngineModel': 'string',
'EngineAttributes': [
{
'Name': 'string',
'Value': 'string'
},
],
'EngineVersion': 'string',
'InstanceProfileArn': 'string',
'InstanceType': 'string',
'KeyPair': 'string',
'MaintenanceStatus': 'SUCCESS'|'FAILED',
'PreferredMaintenanceWindow': 'string',
'PreferredBackupWindow': 'string',
'SecurityGroupIds': [
'string',
],
'ServiceRoleArn': 'string',
'Status': 'BACKING_UP'|'CONNECTION_LOST'|'CREATING'|'DELETING'|'MODIFYING'|'FAILED'|'HEALTHY'|'RUNNING'|'RESTORING'|'SETUP'|'UNDER_MAINTENANCE'|'UNHEALTHY'|'TERMINATED',
'StatusReason': 'string',
'SubnetIds': [
'string',
],
'ServerArn': 'string'
}
}
Response Structure
(dict) --
Server (dict) --
The server that is created by the request.
AssociatePublicIpAddress (boolean) --
Associate a public IP address with a server that you are launching.
BackupRetentionCount (integer) --
The number of automated backups to keep.
ServerName (string) --
The name of the server.
CreatedAt (datetime) --
Time stamp of server creation. Example 2016-07-29T13:38:47.520Z
CloudFormationStackArn (string) --
The ARN of the CloudFormation stack that was used to create the server.
CustomDomain (string) --
An optional public endpoint of a server, such as https://aws.my-company.com . You cannot access the server by using the Endpoint value if the server has a CustomDomain specified.
DisableAutomatedBackup (boolean) --
Disables automated backups. The number of stored backups is dependent on the value of PreferredBackupCount.
Endpoint (string) --
A DNS name that can be used to access the engine. Example: myserver-asdfghjkl.us-east-1.opsworks.io . You cannot access the server by using the Endpoint value if the server has a CustomDomain specified.
Engine (string) --
The engine type of the server. Valid values in this release include ChefAutomate and Puppet .
EngineModel (string) --
The engine model of the server. Valid values in this release include Monolithic for Puppet and Single for Chef.
EngineAttributes (list) --
The response of a createServer() request returns the master credential to access the server in EngineAttributes. These credentials are not stored by AWS OpsWorks CM; they are returned only as part of the result of createServer().
Attributes returned in a createServer response for Chef
Attributes returned in a createServer response for Puppet
(dict) --
A name and value pair that is specific to the engine of the server.
Name (string) --
The name of the engine attribute.
Value (string) --
The value of the engine attribute.
EngineVersion (string) --
The engine version of the server. For a Chef server, the valid value for EngineVersion is currently 2 . For a Puppet server, specify either 2019 or 2017 .
InstanceProfileArn (string) --
The instance profile ARN of the server.
InstanceType (string) --
The instance type for the server, as specified in the CloudFormation stack. This might not be the same instance type that is shown in the EC2 console.
KeyPair (string) --
The key pair associated with the server.
MaintenanceStatus (string) --
The status of the most recent server maintenance run. Shows SUCCESS or FAILED .
PreferredMaintenanceWindow (string) --
The preferred maintenance period specified for the server.
PreferredBackupWindow (string) --
The preferred backup period specified for the server.
SecurityGroupIds (list) --
The security group IDs for the server, as specified in the CloudFormation stack. These might not be the same security groups that are shown in the EC2 console.
ServiceRoleArn (string) --
The service role ARN used to create the server.
Status (string) --
The server's status. This field displays the states of actions in progress, such as creating, running, or backing up the server, as well as the server's health state.
StatusReason (string) --
Depending on the server status, this field has either a human-readable message (such as a create or backup error), or an escaped block of JSON (used for health check results).
SubnetIds (list) --
The subnet IDs specified in a CreateServer request.
ServerArn (string) --
The ARN of the server.
Exceptions
Deletes a backup. You can delete both manual and automated backups. This operation is asynchronous.
An InvalidStateException is thrown when a backup deletion is already in progress. A ResourceNotFoundException is thrown when the backup does not exist. A ValidationException is thrown when parameters of the request are not valid.
See also: AWS API Documentation
Request Syntax
response = client.delete_backup(
BackupId='string'
)
[REQUIRED]
The ID of the backup to delete. Run the DescribeBackups command to get a list of backup IDs. Backup IDs are in the format ServerName-yyyyMMddHHmmssSSS .
{}
Response Structure
Exceptions
Deletes the server and the underlying AWS CloudFormation stacks (including the server's EC2 instance). When you run this command, the server state is updated to DELETING . After the server is deleted, it is no longer returned by DescribeServer requests. If the AWS CloudFormation stack cannot be deleted, the server cannot be deleted.
This operation is asynchronous.
An InvalidStateException is thrown when a server deletion is already in progress. A ResourceNotFoundException is thrown when the server does not exist. A ValidationException is raised when parameters of the request are not valid.
See also: AWS API Documentation
Request Syntax
response = client.delete_server(
ServerName='string'
)
[REQUIRED]
The ID of the server to delete.
{}
Response Structure
Exceptions
Describes your OpsWorks-CM account attributes.
This operation is synchronous.
See also: AWS API Documentation
Request Syntax
response = client.describe_account_attributes()
{
'Attributes': [
{
'Name': 'string',
'Maximum': 123,
'Used': 123
},
]
}
Response Structure
The attributes that are currently set for the account.
Stores account attributes.
The attribute name. The following are supported attribute names.
The maximum allowed value.
The current usage, such as the current number of servers that are associated with the account.
Describes backups. The results are ordered by time, with newest backups first. If you do not specify a BackupId or ServerName, the command returns all backups.
This operation is synchronous.
A ResourceNotFoundException is thrown when the backup does not exist. A ValidationException is raised when parameters of the request are not valid.
See also: AWS API Documentation
Request Syntax
response = client.describe_backups(
BackupId='string',
ServerName='string',
NextToken='string',
MaxResults=123
)
dict
Response Syntax
{
'Backups': [
{
'BackupArn': 'string',
'BackupId': 'string',
'BackupType': 'AUTOMATED'|'MANUAL',
'CreatedAt': datetime(2015, 1, 1),
'Description': 'string',
'Engine': 'string',
'EngineModel': 'string',
'EngineVersion': 'string',
'InstanceProfileArn': 'string',
'InstanceType': 'string',
'KeyPair': 'string',
'PreferredBackupWindow': 'string',
'PreferredMaintenanceWindow': 'string',
'S3DataSize': 123,
'S3DataUrl': 'string',
'S3LogUrl': 'string',
'SecurityGroupIds': [
'string',
],
'ServerName': 'string',
'ServiceRoleArn': 'string',
'Status': 'IN_PROGRESS'|'OK'|'FAILED'|'DELETING',
'StatusDescription': 'string',
'SubnetIds': [
'string',
],
'ToolsVersion': 'string',
'UserArn': 'string'
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
Backups (list) --
Contains the response to a DescribeBackups request.
(dict) --
Describes a single backup.
BackupArn (string) --
The ARN of the backup.
BackupId (string) --
The generated ID of the backup. Example: myServerName-yyyyMMddHHmmssSSS
BackupType (string) --
The backup type. Valid values are automated or manual .
CreatedAt (datetime) --
The time stamp when the backup was created in the database. Example: 2016-07-29T13:38:47.520Z
Description (string) --
A user-provided description for a manual backup. This field is empty for automated backups.
Engine (string) --
The engine type that is obtained from the server when the backup is created.
EngineModel (string) --
The engine model that is obtained from the server when the backup is created.
EngineVersion (string) --
The engine version that is obtained from the server when the backup is created.
InstanceProfileArn (string) --
The EC2 instance profile ARN that is obtained from the server when the backup is created. Because this value is stored, you are not required to provide the InstanceProfileArn again if you restore a backup.
InstanceType (string) --
The instance type that is obtained from the server when the backup is created.
KeyPair (string) --
The key pair that is obtained from the server when the backup is created.
PreferredBackupWindow (string) --
The preferred backup period that is obtained from the server when the backup is created.
PreferredMaintenanceWindow (string) --
The preferred maintenance period that is obtained from the server when the backup is created.
S3DataSize (integer) --
This field is deprecated and is no longer used.
S3DataUrl (string) --
This field is deprecated and is no longer used.
S3LogUrl (string) --
The Amazon S3 URL of the backup's log file.
SecurityGroupIds (list) --
The security group IDs that are obtained from the server when the backup is created.
ServerName (string) --
The name of the server from which the backup was made.
ServiceRoleArn (string) --
The service role ARN that is obtained from the server when the backup is created.
Status (string) --
The status of a backup while in progress.
StatusDescription (string) --
An informational message about backup status.
SubnetIds (list) --
The subnet IDs that are obtained from the server when the backup is created.
ToolsVersion (string) --
The version of AWS OpsWorks CM-specific tools that is obtained from the server when the backup is created.
UserArn (string) --
The IAM user ARN of the requester for manual backups. This field is empty for automated backups.
NextToken (string) --
This is not currently implemented for DescribeBackups requests.
Exceptions
Describes events for a specified server. Results are ordered by time, with newest events first.
This operation is synchronous.
A ResourceNotFoundException is thrown when the server does not exist. A ValidationException is raised when parameters of the request are not valid.
See also: AWS API Documentation
Request Syntax
response = client.describe_events(
ServerName='string',
NextToken='string',
MaxResults=123
)
[REQUIRED]
The name of the server for which you want to view events.
dict
Response Syntax
{
'ServerEvents': [
{
'CreatedAt': datetime(2015, 1, 1),
'ServerName': 'string',
'Message': 'string',
'LogUrl': 'string'
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
ServerEvents (list) --
Contains the response to a DescribeEvents request.
(dict) --
An event that is related to the server, such as the start of maintenance or backup.
CreatedAt (datetime) --
The time when the event occurred.
ServerName (string) --
The name of the server on or for which the event occurred.
Message (string) --
A human-readable informational or status message.
LogUrl (string) --
The Amazon S3 URL of the event's log file.
NextToken (string) --
NextToken is a string that is returned in some command responses. It indicates that not all entries have been returned, and that you must run at least one more request to get remaining items. To get remaining results, call DescribeEvents again, and assign the token from the previous results as the value of the nextToken parameter. If there are no more results, the response object's nextToken parameter value is null . Setting a nextToken value that was not returned in your previous results causes an InvalidNextTokenException to occur.
Exceptions
Returns the current status of an existing association or disassociation request.
A ResourceNotFoundException is thrown when no recent association or disassociation request with the specified token is found, or when the server does not exist. A ValidationException is raised when parameters of the request are not valid.
See also: AWS API Documentation
Request Syntax
response = client.describe_node_association_status(
NodeAssociationStatusToken='string',
ServerName='string'
)
[REQUIRED]
The token returned in either the AssociateNodeResponse or the DisassociateNodeResponse.
[REQUIRED]
The name of the server from which to disassociate the node.
dict
Response Syntax
{
'NodeAssociationStatus': 'SUCCESS'|'FAILED'|'IN_PROGRESS',
'EngineAttributes': [
{
'Name': 'string',
'Value': 'string'
},
]
}
Response Structure
(dict) --
NodeAssociationStatus (string) --
The status of the association or disassociation request.
Possible values:
EngineAttributes (list) --
Attributes specific to the node association. In Puppet, the attibute PUPPET_NODE_CERT contains the signed certificate (the result of the CSR).
(dict) --
A name and value pair that is specific to the engine of the server.
Name (string) --
The name of the engine attribute.
Value (string) --
The value of the engine attribute.
Exceptions
Lists all configuration management servers that are identified with your account. Only the stored results from Amazon DynamoDB are returned. AWS OpsWorks CM does not query other services.
This operation is synchronous.
A ResourceNotFoundException is thrown when the server does not exist. A ValidationException is raised when parameters of the request are not valid.
See also: AWS API Documentation
Request Syntax
response = client.describe_servers(
ServerName='string',
NextToken='string',
MaxResults=123
)
dict
Response Syntax
{
'Servers': [
{
'AssociatePublicIpAddress': True|False,
'BackupRetentionCount': 123,
'ServerName': 'string',
'CreatedAt': datetime(2015, 1, 1),
'CloudFormationStackArn': 'string',
'CustomDomain': 'string',
'DisableAutomatedBackup': True|False,
'Endpoint': 'string',
'Engine': 'string',
'EngineModel': 'string',
'EngineAttributes': [
{
'Name': 'string',
'Value': 'string'
},
],
'EngineVersion': 'string',
'InstanceProfileArn': 'string',
'InstanceType': 'string',
'KeyPair': 'string',
'MaintenanceStatus': 'SUCCESS'|'FAILED',
'PreferredMaintenanceWindow': 'string',
'PreferredBackupWindow': 'string',
'SecurityGroupIds': [
'string',
],
'ServiceRoleArn': 'string',
'Status': 'BACKING_UP'|'CONNECTION_LOST'|'CREATING'|'DELETING'|'MODIFYING'|'FAILED'|'HEALTHY'|'RUNNING'|'RESTORING'|'SETUP'|'UNDER_MAINTENANCE'|'UNHEALTHY'|'TERMINATED',
'StatusReason': 'string',
'SubnetIds': [
'string',
],
'ServerArn': 'string'
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
Servers (list) --
Contains the response to a DescribeServers request.
For Chef Automate servers: If DescribeServersResponse$Servers$EngineAttributes includes CHEF_MAJOR_UPGRADE_AVAILABLE, you can upgrade the Chef Automate server to Chef Automate 2. To be eligible for upgrade, a server running Chef Automate 1 must have had at least one successful maintenance run after November 1, 2019.
For Puppet servers: DescribeServersResponse$Servers$EngineAttributes contains the following two responses:
(dict) --
Describes a configuration management server.
AssociatePublicIpAddress (boolean) --
Associate a public IP address with a server that you are launching.
BackupRetentionCount (integer) --
The number of automated backups to keep.
ServerName (string) --
The name of the server.
CreatedAt (datetime) --
Time stamp of server creation. Example 2016-07-29T13:38:47.520Z
CloudFormationStackArn (string) --
The ARN of the CloudFormation stack that was used to create the server.
CustomDomain (string) --
An optional public endpoint of a server, such as https://aws.my-company.com . You cannot access the server by using the Endpoint value if the server has a CustomDomain specified.
DisableAutomatedBackup (boolean) --
Disables automated backups. The number of stored backups is dependent on the value of PreferredBackupCount.
Endpoint (string) --
A DNS name that can be used to access the engine. Example: myserver-asdfghjkl.us-east-1.opsworks.io . You cannot access the server by using the Endpoint value if the server has a CustomDomain specified.
Engine (string) --
The engine type of the server. Valid values in this release include ChefAutomate and Puppet .
EngineModel (string) --
The engine model of the server. Valid values in this release include Monolithic for Puppet and Single for Chef.
EngineAttributes (list) --
The response of a createServer() request returns the master credential to access the server in EngineAttributes. These credentials are not stored by AWS OpsWorks CM; they are returned only as part of the result of createServer().
Attributes returned in a createServer response for Chef
Attributes returned in a createServer response for Puppet
(dict) --
A name and value pair that is specific to the engine of the server.
Name (string) --
The name of the engine attribute.
Value (string) --
The value of the engine attribute.
EngineVersion (string) --
The engine version of the server. For a Chef server, the valid value for EngineVersion is currently 2 . For a Puppet server, specify either 2019 or 2017 .
InstanceProfileArn (string) --
The instance profile ARN of the server.
InstanceType (string) --
The instance type for the server, as specified in the CloudFormation stack. This might not be the same instance type that is shown in the EC2 console.
KeyPair (string) --
The key pair associated with the server.
MaintenanceStatus (string) --
The status of the most recent server maintenance run. Shows SUCCESS or FAILED .
PreferredMaintenanceWindow (string) --
The preferred maintenance period specified for the server.
PreferredBackupWindow (string) --
The preferred backup period specified for the server.
SecurityGroupIds (list) --
The security group IDs for the server, as specified in the CloudFormation stack. These might not be the same security groups that are shown in the EC2 console.
ServiceRoleArn (string) --
The service role ARN used to create the server.
Status (string) --
The server's status. This field displays the states of actions in progress, such as creating, running, or backing up the server, as well as the server's health state.
StatusReason (string) --
Depending on the server status, this field has either a human-readable message (such as a create or backup error), or an escaped block of JSON (used for health check results).
SubnetIds (list) --
The subnet IDs specified in a CreateServer request.
ServerArn (string) --
The ARN of the server.
NextToken (string) --
This is not currently implemented for DescribeServers requests.
Exceptions
Disassociates a node from an AWS OpsWorks CM server, and removes the node from the server's managed nodes. After a node is disassociated, the node key pair is no longer valid for accessing the configuration manager's API. For more information about how to associate a node, see AssociateNode .
A node can can only be disassociated from a server that is in a HEALTHY state. Otherwise, an InvalidStateException is thrown. A ResourceNotFoundException is thrown when the server does not exist. A ValidationException is raised when parameters of the request are not valid.
See also: AWS API Documentation
Request Syntax
response = client.disassociate_node(
ServerName='string',
NodeName='string',
EngineAttributes=[
{
'Name': 'string',
'Value': 'string'
},
]
)
[REQUIRED]
The name of the server from which to disassociate the node.
[REQUIRED]
The name of the client node.
Engine attributes that are used for disassociating the node. No attributes are required for Puppet.
Attributes required in a DisassociateNode request for Chef
A name and value pair that is specific to the engine of the server.
The name of the engine attribute.
The value of the engine attribute.
dict
Response Syntax
{
'NodeAssociationStatusToken': 'string'
}
Response Structure
(dict) --
NodeAssociationStatusToken (string) --
Contains a token which can be passed to the DescribeNodeAssociationStatus API call to get the status of the disassociation request.
Exceptions
Exports a specified server engine attribute as a base64-encoded string. For example, you can export user data that you can use in EC2 to associate nodes with a server.
This operation is synchronous.
A ValidationException is raised when parameters of the request are not valid. A ResourceNotFoundException is thrown when the server does not exist. An InvalidStateException is thrown when the server is in any of the following states: CREATING, TERMINATED, FAILED or DELETING.
See also: AWS API Documentation
Request Syntax
response = client.export_server_engine_attribute(
ExportAttributeName='string',
ServerName='string',
InputAttributes=[
{
'Name': 'string',
'Value': 'string'
},
]
)
[REQUIRED]
The name of the export attribute. Currently, the supported export attribute is Userdata . This exports a user data script that includes parameters and values provided in the InputAttributes list.
[REQUIRED]
The name of the server from which you are exporting the attribute.
The list of engine attributes. The list type is EngineAttribute . An EngineAttribute list item is a pair that includes an attribute name and its value. For the Userdata ExportAttributeName, the following are supported engine attribute names.
A name and value pair that is specific to the engine of the server.
The name of the engine attribute.
The value of the engine attribute.
dict
Response Syntax
{
'EngineAttribute': {
'Name': 'string',
'Value': 'string'
},
'ServerName': 'string'
}
Response Structure
(dict) --
EngineAttribute (dict) --
The requested engine attribute pair with attribute name and value.
Name (string) --
The name of the engine attribute.
Value (string) --
The value of the engine attribute.
ServerName (string) --
The server name used in the request.
Exceptions
Generate a presigned url given a client, its method, and arguments
The presigned url
Create a paginator for an operation.
Returns an object that can wait for some condition.
Returns a list of tags that are applied to the specified AWS OpsWorks for Chef Automate or AWS OpsWorks for Puppet Enterprise servers or backups.
See also: AWS API Documentation
Request Syntax
response = client.list_tags_for_resource(
ResourceArn='string',
NextToken='string',
MaxResults=123
)
[REQUIRED]
The Amazon Resource Number (ARN) of an AWS OpsWorks for Chef Automate or AWS OpsWorks for Puppet Enterprise server for which you want to show applied tags. For example, arn:aws:opsworks-cm:us-west-2:123456789012:server/test-owcm-server/EXAMPLE-66b0-4196-8274-d1a2bEXAMPLE .
dict
Response Syntax
{
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
Tags (list) --
Tags that have been applied to the resource.
(dict) --
A map that contains tag keys and tag values to attach to an AWS OpsWorks for Chef Automate or AWS OpsWorks for Puppet Enterprise server. Leading and trailing white spaces are trimmed from both the key and value. A maximum of 50 user-applied tags is allowed for tag-supported AWS OpsWorks-CM resources.
Key (string) --
A tag key, such as Stage or Name . A tag key cannot be empty. The key can be a maximum of 127 characters, and can contain only Unicode letters, numbers, or separators, or the following special characters: + - = . _ : /
Value (string) --
An optional tag value, such as Production or test-owcm-server . The value can be a maximum of 255 characters, and contain only Unicode letters, numbers, or separators, or the following special characters: + - = . _ : /
NextToken (string) --
A token that you can use as the value of NextToken in subsequent calls to the API to show more results.
Exceptions
Restores a backup to a server that is in a CONNECTION_LOST , HEALTHY , RUNNING , UNHEALTHY , or TERMINATED state. When you run RestoreServer, the server's EC2 instance is deleted, and a new EC2 instance is configured. RestoreServer maintains the existing server endpoint, so configuration management of the server's client devices (nodes) should continue to work.
Restoring from a backup is performed by creating a new EC2 instance. If restoration is successful, and the server is in a HEALTHY state, AWS OpsWorks CM switches traffic over to the new instance. After restoration is finished, the old EC2 instance is maintained in a Running or Stopped state, but is eventually terminated.
This operation is asynchronous.
An InvalidStateException is thrown when the server is not in a valid state. A ResourceNotFoundException is thrown when the server does not exist. A ValidationException is raised when parameters of the request are not valid.
See also: AWS API Documentation
Request Syntax
response = client.restore_server(
BackupId='string',
ServerName='string',
InstanceType='string',
KeyPair='string'
)
[REQUIRED]
The ID of the backup that you want to use to restore a server.
[REQUIRED]
The name of the server that you want to restore.
dict
Response Syntax
{
'Server': {
'AssociatePublicIpAddress': True|False,
'BackupRetentionCount': 123,
'ServerName': 'string',
'CreatedAt': datetime(2015, 1, 1),
'CloudFormationStackArn': 'string',
'CustomDomain': 'string',
'DisableAutomatedBackup': True|False,
'Endpoint': 'string',
'Engine': 'string',
'EngineModel': 'string',
'EngineAttributes': [
{
'Name': 'string',
'Value': 'string'
},
],
'EngineVersion': 'string',
'InstanceProfileArn': 'string',
'InstanceType': 'string',
'KeyPair': 'string',
'MaintenanceStatus': 'SUCCESS'|'FAILED',
'PreferredMaintenanceWindow': 'string',
'PreferredBackupWindow': 'string',
'SecurityGroupIds': [
'string',
],
'ServiceRoleArn': 'string',
'Status': 'BACKING_UP'|'CONNECTION_LOST'|'CREATING'|'DELETING'|'MODIFYING'|'FAILED'|'HEALTHY'|'RUNNING'|'RESTORING'|'SETUP'|'UNDER_MAINTENANCE'|'UNHEALTHY'|'TERMINATED',
'StatusReason': 'string',
'SubnetIds': [
'string',
],
'ServerArn': 'string'
}
}
Response Structure
(dict) --
Server (dict) --
Describes a configuration management server.
AssociatePublicIpAddress (boolean) --
Associate a public IP address with a server that you are launching.
BackupRetentionCount (integer) --
The number of automated backups to keep.
ServerName (string) --
The name of the server.
CreatedAt (datetime) --
Time stamp of server creation. Example 2016-07-29T13:38:47.520Z
CloudFormationStackArn (string) --
The ARN of the CloudFormation stack that was used to create the server.
CustomDomain (string) --
An optional public endpoint of a server, such as https://aws.my-company.com . You cannot access the server by using the Endpoint value if the server has a CustomDomain specified.
DisableAutomatedBackup (boolean) --
Disables automated backups. The number of stored backups is dependent on the value of PreferredBackupCount.
Endpoint (string) --
A DNS name that can be used to access the engine. Example: myserver-asdfghjkl.us-east-1.opsworks.io . You cannot access the server by using the Endpoint value if the server has a CustomDomain specified.
Engine (string) --
The engine type of the server. Valid values in this release include ChefAutomate and Puppet .
EngineModel (string) --
The engine model of the server. Valid values in this release include Monolithic for Puppet and Single for Chef.
EngineAttributes (list) --
The response of a createServer() request returns the master credential to access the server in EngineAttributes. These credentials are not stored by AWS OpsWorks CM; they are returned only as part of the result of createServer().
Attributes returned in a createServer response for Chef
Attributes returned in a createServer response for Puppet
(dict) --
A name and value pair that is specific to the engine of the server.
Name (string) --
The name of the engine attribute.
Value (string) --
The value of the engine attribute.
EngineVersion (string) --
The engine version of the server. For a Chef server, the valid value for EngineVersion is currently 2 . For a Puppet server, specify either 2019 or 2017 .
InstanceProfileArn (string) --
The instance profile ARN of the server.
InstanceType (string) --
The instance type for the server, as specified in the CloudFormation stack. This might not be the same instance type that is shown in the EC2 console.
KeyPair (string) --
The key pair associated with the server.
MaintenanceStatus (string) --
The status of the most recent server maintenance run. Shows SUCCESS or FAILED .
PreferredMaintenanceWindow (string) --
The preferred maintenance period specified for the server.
PreferredBackupWindow (string) --
The preferred backup period specified for the server.
SecurityGroupIds (list) --
The security group IDs for the server, as specified in the CloudFormation stack. These might not be the same security groups that are shown in the EC2 console.
ServiceRoleArn (string) --
The service role ARN used to create the server.
Status (string) --
The server's status. This field displays the states of actions in progress, such as creating, running, or backing up the server, as well as the server's health state.
StatusReason (string) --
Depending on the server status, this field has either a human-readable message (such as a create or backup error), or an escaped block of JSON (used for health check results).
SubnetIds (list) --
The subnet IDs specified in a CreateServer request.
ServerArn (string) --
The ARN of the server.
Exceptions
Manually starts server maintenance. This command can be useful if an earlier maintenance attempt failed, and the underlying cause of maintenance failure has been resolved. The server is in an UNDER_MAINTENANCE state while maintenance is in progress.
Maintenance can only be started on servers in HEALTHY and UNHEALTHY states. Otherwise, an InvalidStateException is thrown. A ResourceNotFoundException is thrown when the server does not exist. A ValidationException is raised when parameters of the request are not valid.
See also: AWS API Documentation
Request Syntax
response = client.start_maintenance(
ServerName='string',
EngineAttributes=[
{
'Name': 'string',
'Value': 'string'
},
]
)
[REQUIRED]
The name of the server on which to run maintenance.
Engine attributes that are specific to the server on which you want to run maintenance.
Attributes accepted in a StartMaintenance request for Chef
A name and value pair that is specific to the engine of the server.
The name of the engine attribute.
The value of the engine attribute.
dict
Response Syntax
{
'Server': {
'AssociatePublicIpAddress': True|False,
'BackupRetentionCount': 123,
'ServerName': 'string',
'CreatedAt': datetime(2015, 1, 1),
'CloudFormationStackArn': 'string',
'CustomDomain': 'string',
'DisableAutomatedBackup': True|False,
'Endpoint': 'string',
'Engine': 'string',
'EngineModel': 'string',
'EngineAttributes': [
{
'Name': 'string',
'Value': 'string'
},
],
'EngineVersion': 'string',
'InstanceProfileArn': 'string',
'InstanceType': 'string',
'KeyPair': 'string',
'MaintenanceStatus': 'SUCCESS'|'FAILED',
'PreferredMaintenanceWindow': 'string',
'PreferredBackupWindow': 'string',
'SecurityGroupIds': [
'string',
],
'ServiceRoleArn': 'string',
'Status': 'BACKING_UP'|'CONNECTION_LOST'|'CREATING'|'DELETING'|'MODIFYING'|'FAILED'|'HEALTHY'|'RUNNING'|'RESTORING'|'SETUP'|'UNDER_MAINTENANCE'|'UNHEALTHY'|'TERMINATED',
'StatusReason': 'string',
'SubnetIds': [
'string',
],
'ServerArn': 'string'
}
}
Response Structure
(dict) --
Server (dict) --
Contains the response to a StartMaintenance request.
AssociatePublicIpAddress (boolean) --
Associate a public IP address with a server that you are launching.
BackupRetentionCount (integer) --
The number of automated backups to keep.
ServerName (string) --
The name of the server.
CreatedAt (datetime) --
Time stamp of server creation. Example 2016-07-29T13:38:47.520Z
CloudFormationStackArn (string) --
The ARN of the CloudFormation stack that was used to create the server.
CustomDomain (string) --
An optional public endpoint of a server, such as https://aws.my-company.com . You cannot access the server by using the Endpoint value if the server has a CustomDomain specified.
DisableAutomatedBackup (boolean) --
Disables automated backups. The number of stored backups is dependent on the value of PreferredBackupCount.
Endpoint (string) --
A DNS name that can be used to access the engine. Example: myserver-asdfghjkl.us-east-1.opsworks.io . You cannot access the server by using the Endpoint value if the server has a CustomDomain specified.
Engine (string) --
The engine type of the server. Valid values in this release include ChefAutomate and Puppet .
EngineModel (string) --
The engine model of the server. Valid values in this release include Monolithic for Puppet and Single for Chef.
EngineAttributes (list) --
The response of a createServer() request returns the master credential to access the server in EngineAttributes. These credentials are not stored by AWS OpsWorks CM; they are returned only as part of the result of createServer().
Attributes returned in a createServer response for Chef
Attributes returned in a createServer response for Puppet
(dict) --
A name and value pair that is specific to the engine of the server.
Name (string) --
The name of the engine attribute.
Value (string) --
The value of the engine attribute.
EngineVersion (string) --
The engine version of the server. For a Chef server, the valid value for EngineVersion is currently 2 . For a Puppet server, specify either 2019 or 2017 .
InstanceProfileArn (string) --
The instance profile ARN of the server.
InstanceType (string) --
The instance type for the server, as specified in the CloudFormation stack. This might not be the same instance type that is shown in the EC2 console.
KeyPair (string) --
The key pair associated with the server.
MaintenanceStatus (string) --
The status of the most recent server maintenance run. Shows SUCCESS or FAILED .
PreferredMaintenanceWindow (string) --
The preferred maintenance period specified for the server.
PreferredBackupWindow (string) --
The preferred backup period specified for the server.
SecurityGroupIds (list) --
The security group IDs for the server, as specified in the CloudFormation stack. These might not be the same security groups that are shown in the EC2 console.
ServiceRoleArn (string) --
The service role ARN used to create the server.
Status (string) --
The server's status. This field displays the states of actions in progress, such as creating, running, or backing up the server, as well as the server's health state.
StatusReason (string) --
Depending on the server status, this field has either a human-readable message (such as a create or backup error), or an escaped block of JSON (used for health check results).
SubnetIds (list) --
The subnet IDs specified in a CreateServer request.
ServerArn (string) --
The ARN of the server.
Exceptions
Applies tags to an AWS OpsWorks for Chef Automate or AWS OpsWorks for Puppet Enterprise server, or to server backups.
See also: AWS API Documentation
Request Syntax
response = client.tag_resource(
ResourceArn='string',
Tags=[
{
'Key': 'string',
'Value': 'string'
},
]
)
[REQUIRED]
The Amazon Resource Number (ARN) of a resource to which you want to apply tags. For example, arn:aws:opsworks-cm:us-west-2:123456789012:server/test-owcm-server/EXAMPLE-66b0-4196-8274-d1a2bEXAMPLE .
[REQUIRED]
A map that contains tag keys and tag values to attach to AWS OpsWorks-CM servers or backups.
A map that contains tag keys and tag values to attach to an AWS OpsWorks for Chef Automate or AWS OpsWorks for Puppet Enterprise server. Leading and trailing white spaces are trimmed from both the key and value. A maximum of 50 user-applied tags is allowed for tag-supported AWS OpsWorks-CM resources.
A tag key, such as Stage or Name . A tag key cannot be empty. The key can be a maximum of 127 characters, and can contain only Unicode letters, numbers, or separators, or the following special characters: + - = . _ : /
An optional tag value, such as Production or test-owcm-server . The value can be a maximum of 255 characters, and contain only Unicode letters, numbers, or separators, or the following special characters: + - = . _ : /
dict
Response Syntax
{}
Response Structure
Exceptions
Removes specified tags from an AWS OpsWorks-CM server or backup.
See also: AWS API Documentation
Request Syntax
response = client.untag_resource(
ResourceArn='string',
TagKeys=[
'string',
]
)
[REQUIRED]
The Amazon Resource Number (ARN) of a resource from which you want to remove tags. For example, arn:aws:opsworks-cm:us-west-2:123456789012:server/test-owcm-server/EXAMPLE-66b0-4196-8274-d1a2bEXAMPLE .
[REQUIRED]
The keys of tags that you want to remove.
dict
Response Syntax
{}
Response Structure
Exceptions
Updates settings for a server.
This operation is synchronous.
See also: AWS API Documentation
Request Syntax
response = client.update_server(
DisableAutomatedBackup=True|False,
BackupRetentionCount=123,
ServerName='string',
PreferredMaintenanceWindow='string',
PreferredBackupWindow='string'
)
[REQUIRED]
The name of the server to update.
DDD:HH:MM (weekly start time) or HH:MM (daily start time).
Time windows always use coordinated universal time (UTC). Valid strings for day of week (DDD ) are: Mon , Tue , Wed , Thr , Fri , Sat , or Sun .
DDD:HH:MM (weekly start time) or HH:MM (daily start time).
Time windows always use coordinated universal time (UTC). Valid strings for day of week (DDD ) are: Mon , Tue , Wed , Thr , Fri , Sat , or Sun .
dict
Response Syntax
{
'Server': {
'AssociatePublicIpAddress': True|False,
'BackupRetentionCount': 123,
'ServerName': 'string',
'CreatedAt': datetime(2015, 1, 1),
'CloudFormationStackArn': 'string',
'CustomDomain': 'string',
'DisableAutomatedBackup': True|False,
'Endpoint': 'string',
'Engine': 'string',
'EngineModel': 'string',
'EngineAttributes': [
{
'Name': 'string',
'Value': 'string'
},
],
'EngineVersion': 'string',
'InstanceProfileArn': 'string',
'InstanceType': 'string',
'KeyPair': 'string',
'MaintenanceStatus': 'SUCCESS'|'FAILED',
'PreferredMaintenanceWindow': 'string',
'PreferredBackupWindow': 'string',
'SecurityGroupIds': [
'string',
],
'ServiceRoleArn': 'string',
'Status': 'BACKING_UP'|'CONNECTION_LOST'|'CREATING'|'DELETING'|'MODIFYING'|'FAILED'|'HEALTHY'|'RUNNING'|'RESTORING'|'SETUP'|'UNDER_MAINTENANCE'|'UNHEALTHY'|'TERMINATED',
'StatusReason': 'string',
'SubnetIds': [
'string',
],
'ServerArn': 'string'
}
}
Response Structure
(dict) --
Server (dict) --
Contains the response to a UpdateServer request.
AssociatePublicIpAddress (boolean) --
Associate a public IP address with a server that you are launching.
BackupRetentionCount (integer) --
The number of automated backups to keep.
ServerName (string) --
The name of the server.
CreatedAt (datetime) --
Time stamp of server creation. Example 2016-07-29T13:38:47.520Z
CloudFormationStackArn (string) --
The ARN of the CloudFormation stack that was used to create the server.
CustomDomain (string) --
An optional public endpoint of a server, such as https://aws.my-company.com . You cannot access the server by using the Endpoint value if the server has a CustomDomain specified.
DisableAutomatedBackup (boolean) --
Disables automated backups. The number of stored backups is dependent on the value of PreferredBackupCount.
Endpoint (string) --
A DNS name that can be used to access the engine. Example: myserver-asdfghjkl.us-east-1.opsworks.io . You cannot access the server by using the Endpoint value if the server has a CustomDomain specified.
Engine (string) --
The engine type of the server. Valid values in this release include ChefAutomate and Puppet .
EngineModel (string) --
The engine model of the server. Valid values in this release include Monolithic for Puppet and Single for Chef.
EngineAttributes (list) --
The response of a createServer() request returns the master credential to access the server in EngineAttributes. These credentials are not stored by AWS OpsWorks CM; they are returned only as part of the result of createServer().
Attributes returned in a createServer response for Chef
Attributes returned in a createServer response for Puppet
(dict) --
A name and value pair that is specific to the engine of the server.
Name (string) --
The name of the engine attribute.
Value (string) --
The value of the engine attribute.
EngineVersion (string) --
The engine version of the server. For a Chef server, the valid value for EngineVersion is currently 2 . For a Puppet server, specify either 2019 or 2017 .
InstanceProfileArn (string) --
The instance profile ARN of the server.
InstanceType (string) --
The instance type for the server, as specified in the CloudFormation stack. This might not be the same instance type that is shown in the EC2 console.
KeyPair (string) --
The key pair associated with the server.
MaintenanceStatus (string) --
The status of the most recent server maintenance run. Shows SUCCESS or FAILED .
PreferredMaintenanceWindow (string) --
The preferred maintenance period specified for the server.
PreferredBackupWindow (string) --
The preferred backup period specified for the server.
SecurityGroupIds (list) --
The security group IDs for the server, as specified in the CloudFormation stack. These might not be the same security groups that are shown in the EC2 console.
ServiceRoleArn (string) --
The service role ARN used to create the server.
Status (string) --
The server's status. This field displays the states of actions in progress, such as creating, running, or backing up the server, as well as the server's health state.
StatusReason (string) --
Depending on the server status, this field has either a human-readable message (such as a create or backup error), or an escaped block of JSON (used for health check results).
SubnetIds (list) --
The subnet IDs specified in a CreateServer request.
ServerArn (string) --
The ARN of the server.
Exceptions
Updates engine-specific attributes on a specified server. The server enters the MODIFYING state when this operation is in progress. Only one update can occur at a time. You can use this command to reset a Chef server's public key (CHEF_PIVOTAL_KEY ) or a Puppet server's admin password (PUPPET_ADMIN_PASSWORD ).
This operation is asynchronous.
This operation can only be called for servers in HEALTHY or UNHEALTHY states. Otherwise, an InvalidStateException is raised. A ResourceNotFoundException is thrown when the server does not exist. A ValidationException is raised when parameters of the request are not valid.
See also: AWS API Documentation
Request Syntax
response = client.update_server_engine_attributes(
ServerName='string',
AttributeName='string',
AttributeValue='string'
)
[REQUIRED]
The name of the server to update.
[REQUIRED]
The name of the engine attribute to update.
dict
Response Syntax
{
'Server': {
'AssociatePublicIpAddress': True|False,
'BackupRetentionCount': 123,
'ServerName': 'string',
'CreatedAt': datetime(2015, 1, 1),
'CloudFormationStackArn': 'string',
'CustomDomain': 'string',
'DisableAutomatedBackup': True|False,
'Endpoint': 'string',
'Engine': 'string',
'EngineModel': 'string',
'EngineAttributes': [
{
'Name': 'string',
'Value': 'string'
},
],
'EngineVersion': 'string',
'InstanceProfileArn': 'string',
'InstanceType': 'string',
'KeyPair': 'string',
'MaintenanceStatus': 'SUCCESS'|'FAILED',
'PreferredMaintenanceWindow': 'string',
'PreferredBackupWindow': 'string',
'SecurityGroupIds': [
'string',
],
'ServiceRoleArn': 'string',
'Status': 'BACKING_UP'|'CONNECTION_LOST'|'CREATING'|'DELETING'|'MODIFYING'|'FAILED'|'HEALTHY'|'RUNNING'|'RESTORING'|'SETUP'|'UNDER_MAINTENANCE'|'UNHEALTHY'|'TERMINATED',
'StatusReason': 'string',
'SubnetIds': [
'string',
],
'ServerArn': 'string'
}
}
Response Structure
(dict) --
Server (dict) --
Contains the response to an UpdateServerEngineAttributes request.
AssociatePublicIpAddress (boolean) --
Associate a public IP address with a server that you are launching.
BackupRetentionCount (integer) --
The number of automated backups to keep.
ServerName (string) --
The name of the server.
CreatedAt (datetime) --
Time stamp of server creation. Example 2016-07-29T13:38:47.520Z
CloudFormationStackArn (string) --
The ARN of the CloudFormation stack that was used to create the server.
CustomDomain (string) --
An optional public endpoint of a server, such as https://aws.my-company.com . You cannot access the server by using the Endpoint value if the server has a CustomDomain specified.
DisableAutomatedBackup (boolean) --
Disables automated backups. The number of stored backups is dependent on the value of PreferredBackupCount.
Endpoint (string) --
A DNS name that can be used to access the engine. Example: myserver-asdfghjkl.us-east-1.opsworks.io . You cannot access the server by using the Endpoint value if the server has a CustomDomain specified.
Engine (string) --
The engine type of the server. Valid values in this release include ChefAutomate and Puppet .
EngineModel (string) --
The engine model of the server. Valid values in this release include Monolithic for Puppet and Single for Chef.
EngineAttributes (list) --
The response of a createServer() request returns the master credential to access the server in EngineAttributes. These credentials are not stored by AWS OpsWorks CM; they are returned only as part of the result of createServer().
Attributes returned in a createServer response for Chef
Attributes returned in a createServer response for Puppet
(dict) --
A name and value pair that is specific to the engine of the server.
Name (string) --
The name of the engine attribute.
Value (string) --
The value of the engine attribute.
EngineVersion (string) --
The engine version of the server. For a Chef server, the valid value for EngineVersion is currently 2 . For a Puppet server, specify either 2019 or 2017 .
InstanceProfileArn (string) --
The instance profile ARN of the server.
InstanceType (string) --
The instance type for the server, as specified in the CloudFormation stack. This might not be the same instance type that is shown in the EC2 console.
KeyPair (string) --
The key pair associated with the server.
MaintenanceStatus (string) --
The status of the most recent server maintenance run. Shows SUCCESS or FAILED .
PreferredMaintenanceWindow (string) --
The preferred maintenance period specified for the server.
PreferredBackupWindow (string) --
The preferred backup period specified for the server.
SecurityGroupIds (list) --
The security group IDs for the server, as specified in the CloudFormation stack. These might not be the same security groups that are shown in the EC2 console.
ServiceRoleArn (string) --
The service role ARN used to create the server.
Status (string) --
The server's status. This field displays the states of actions in progress, such as creating, running, or backing up the server, as well as the server's health state.
StatusReason (string) --
Depending on the server status, this field has either a human-readable message (such as a create or backup error), or an escaped block of JSON (used for health check results).
SubnetIds (list) --
The subnet IDs specified in a CreateServer request.
ServerArn (string) --
The ARN of the server.
Exceptions
The available paginators are:
paginator = client.get_paginator('describe_backups')
Creates an iterator that will paginate through responses from OpsWorksCM.Client.describe_backups().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
BackupId='string',
ServerName='string',
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'Backups': [
{
'BackupArn': 'string',
'BackupId': 'string',
'BackupType': 'AUTOMATED'|'MANUAL',
'CreatedAt': datetime(2015, 1, 1),
'Description': 'string',
'Engine': 'string',
'EngineModel': 'string',
'EngineVersion': 'string',
'InstanceProfileArn': 'string',
'InstanceType': 'string',
'KeyPair': 'string',
'PreferredBackupWindow': 'string',
'PreferredMaintenanceWindow': 'string',
'S3DataSize': 123,
'S3DataUrl': 'string',
'S3LogUrl': 'string',
'SecurityGroupIds': [
'string',
],
'ServerName': 'string',
'ServiceRoleArn': 'string',
'Status': 'IN_PROGRESS'|'OK'|'FAILED'|'DELETING',
'StatusDescription': 'string',
'SubnetIds': [
'string',
],
'ToolsVersion': 'string',
'UserArn': 'string'
},
],
}
Response Structure
(dict) --
Backups (list) --
Contains the response to a DescribeBackups request.
(dict) --
Describes a single backup.
BackupArn (string) --
The ARN of the backup.
BackupId (string) --
The generated ID of the backup. Example: myServerName-yyyyMMddHHmmssSSS
BackupType (string) --
The backup type. Valid values are automated or manual .
CreatedAt (datetime) --
The time stamp when the backup was created in the database. Example: 2016-07-29T13:38:47.520Z
Description (string) --
A user-provided description for a manual backup. This field is empty for automated backups.
Engine (string) --
The engine type that is obtained from the server when the backup is created.
EngineModel (string) --
The engine model that is obtained from the server when the backup is created.
EngineVersion (string) --
The engine version that is obtained from the server when the backup is created.
InstanceProfileArn (string) --
The EC2 instance profile ARN that is obtained from the server when the backup is created. Because this value is stored, you are not required to provide the InstanceProfileArn again if you restore a backup.
InstanceType (string) --
The instance type that is obtained from the server when the backup is created.
KeyPair (string) --
The key pair that is obtained from the server when the backup is created.
PreferredBackupWindow (string) --
The preferred backup period that is obtained from the server when the backup is created.
PreferredMaintenanceWindow (string) --
The preferred maintenance period that is obtained from the server when the backup is created.
S3DataSize (integer) --
This field is deprecated and is no longer used.
S3DataUrl (string) --
This field is deprecated and is no longer used.
S3LogUrl (string) --
The Amazon S3 URL of the backup's log file.
SecurityGroupIds (list) --
The security group IDs that are obtained from the server when the backup is created.
ServerName (string) --
The name of the server from which the backup was made.
ServiceRoleArn (string) --
The service role ARN that is obtained from the server when the backup is created.
Status (string) --
The status of a backup while in progress.
StatusDescription (string) --
An informational message about backup status.
SubnetIds (list) --
The subnet IDs that are obtained from the server when the backup is created.
ToolsVersion (string) --
The version of AWS OpsWorks CM-specific tools that is obtained from the server when the backup is created.
UserArn (string) --
The IAM user ARN of the requester for manual backups. This field is empty for automated backups.
paginator = client.get_paginator('describe_events')
Creates an iterator that will paginate through responses from OpsWorksCM.Client.describe_events().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
ServerName='string',
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
[REQUIRED]
The name of the server for which you want to view events.
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'ServerEvents': [
{
'CreatedAt': datetime(2015, 1, 1),
'ServerName': 'string',
'Message': 'string',
'LogUrl': 'string'
},
],
}
Response Structure
(dict) --
ServerEvents (list) --
Contains the response to a DescribeEvents request.
(dict) --
An event that is related to the server, such as the start of maintenance or backup.
CreatedAt (datetime) --
The time when the event occurred.
ServerName (string) --
The name of the server on or for which the event occurred.
Message (string) --
A human-readable informational or status message.
LogUrl (string) --
The Amazon S3 URL of the event's log file.
paginator = client.get_paginator('describe_servers')
Creates an iterator that will paginate through responses from OpsWorksCM.Client.describe_servers().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
ServerName='string',
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'Servers': [
{
'AssociatePublicIpAddress': True|False,
'BackupRetentionCount': 123,
'ServerName': 'string',
'CreatedAt': datetime(2015, 1, 1),
'CloudFormationStackArn': 'string',
'CustomDomain': 'string',
'DisableAutomatedBackup': True|False,
'Endpoint': 'string',
'Engine': 'string',
'EngineModel': 'string',
'EngineAttributes': [
{
'Name': 'string',
'Value': 'string'
},
],
'EngineVersion': 'string',
'InstanceProfileArn': 'string',
'InstanceType': 'string',
'KeyPair': 'string',
'MaintenanceStatus': 'SUCCESS'|'FAILED',
'PreferredMaintenanceWindow': 'string',
'PreferredBackupWindow': 'string',
'SecurityGroupIds': [
'string',
],
'ServiceRoleArn': 'string',
'Status': 'BACKING_UP'|'CONNECTION_LOST'|'CREATING'|'DELETING'|'MODIFYING'|'FAILED'|'HEALTHY'|'RUNNING'|'RESTORING'|'SETUP'|'UNDER_MAINTENANCE'|'UNHEALTHY'|'TERMINATED',
'StatusReason': 'string',
'SubnetIds': [
'string',
],
'ServerArn': 'string'
},
],
}
Response Structure
(dict) --
Servers (list) --
Contains the response to a DescribeServers request.
For Chef Automate servers: If DescribeServersResponse$Servers$EngineAttributes includes CHEF_MAJOR_UPGRADE_AVAILABLE, you can upgrade the Chef Automate server to Chef Automate 2. To be eligible for upgrade, a server running Chef Automate 1 must have had at least one successful maintenance run after November 1, 2019.
For Puppet servers: DescribeServersResponse$Servers$EngineAttributes contains the following two responses:
(dict) --
Describes a configuration management server.
AssociatePublicIpAddress (boolean) --
Associate a public IP address with a server that you are launching.
BackupRetentionCount (integer) --
The number of automated backups to keep.
ServerName (string) --
The name of the server.
CreatedAt (datetime) --
Time stamp of server creation. Example 2016-07-29T13:38:47.520Z
CloudFormationStackArn (string) --
The ARN of the CloudFormation stack that was used to create the server.
CustomDomain (string) --
An optional public endpoint of a server, such as https://aws.my-company.com . You cannot access the server by using the Endpoint value if the server has a CustomDomain specified.
DisableAutomatedBackup (boolean) --
Disables automated backups. The number of stored backups is dependent on the value of PreferredBackupCount.
Endpoint (string) --
A DNS name that can be used to access the engine. Example: myserver-asdfghjkl.us-east-1.opsworks.io . You cannot access the server by using the Endpoint value if the server has a CustomDomain specified.
Engine (string) --
The engine type of the server. Valid values in this release include ChefAutomate and Puppet .
EngineModel (string) --
The engine model of the server. Valid values in this release include Monolithic for Puppet and Single for Chef.
EngineAttributes (list) --
The response of a createServer() request returns the master credential to access the server in EngineAttributes. These credentials are not stored by AWS OpsWorks CM; they are returned only as part of the result of createServer().
Attributes returned in a createServer response for Chef
Attributes returned in a createServer response for Puppet
(dict) --
A name and value pair that is specific to the engine of the server.
Name (string) --
The name of the engine attribute.
Value (string) --
The value of the engine attribute.
EngineVersion (string) --
The engine version of the server. For a Chef server, the valid value for EngineVersion is currently 2 . For a Puppet server, specify either 2019 or 2017 .
InstanceProfileArn (string) --
The instance profile ARN of the server.
InstanceType (string) --
The instance type for the server, as specified in the CloudFormation stack. This might not be the same instance type that is shown in the EC2 console.
KeyPair (string) --
The key pair associated with the server.
MaintenanceStatus (string) --
The status of the most recent server maintenance run. Shows SUCCESS or FAILED .
PreferredMaintenanceWindow (string) --
The preferred maintenance period specified for the server.
PreferredBackupWindow (string) --
The preferred backup period specified for the server.
SecurityGroupIds (list) --
The security group IDs for the server, as specified in the CloudFormation stack. These might not be the same security groups that are shown in the EC2 console.
ServiceRoleArn (string) --
The service role ARN used to create the server.
Status (string) --
The server's status. This field displays the states of actions in progress, such as creating, running, or backing up the server, as well as the server's health state.
StatusReason (string) --
Depending on the server status, this field has either a human-readable message (such as a create or backup error), or an escaped block of JSON (used for health check results).
SubnetIds (list) --
The subnet IDs specified in a CreateServer request.
ServerArn (string) --
The ARN of the server.
paginator = client.get_paginator('list_tags_for_resource')
Creates an iterator that will paginate through responses from OpsWorksCM.Client.list_tags_for_resource().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
ResourceArn='string',
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
[REQUIRED]
The Amazon Resource Number (ARN) of an AWS OpsWorks for Chef Automate or AWS OpsWorks for Puppet Enterprise server for which you want to show applied tags. For example, arn:aws:opsworks-cm:us-west-2:123456789012:server/test-owcm-server/EXAMPLE-66b0-4196-8274-d1a2bEXAMPLE .
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
],
}
Response Structure
(dict) --
Tags (list) --
Tags that have been applied to the resource.
(dict) --
A map that contains tag keys and tag values to attach to an AWS OpsWorks for Chef Automate or AWS OpsWorks for Puppet Enterprise server. Leading and trailing white spaces are trimmed from both the key and value. A maximum of 50 user-applied tags is allowed for tag-supported AWS OpsWorks-CM resources.
Key (string) --
A tag key, such as Stage or Name . A tag key cannot be empty. The key can be a maximum of 127 characters, and can contain only Unicode letters, numbers, or separators, or the following special characters: + - = . _ : /
Value (string) --
An optional tag value, such as Production or test-owcm-server . The value can be a maximum of 255 characters, and contain only Unicode letters, numbers, or separators, or the following special characters: + - = . _ : /
The available waiters are:
waiter = client.get_waiter('node_associated')
Polls OpsWorksCM.Client.describe_node_association_status() every 15 seconds until a successful state is reached. An error is returned after 15 failed checks.
See also: AWS API Documentation
Request Syntax
waiter.wait(
NodeAssociationStatusToken='string',
ServerName='string',
WaiterConfig={
'Delay': 123,
'MaxAttempts': 123
}
)
[REQUIRED]
The token returned in either the AssociateNodeResponse or the DisassociateNodeResponse.
[REQUIRED]
The name of the server from which to disassociate the node.
A dictionary that provides parameters to control waiting behavior.
The amount of time in seconds to wait between attempts. Default: 15
The maximum number of attempts to be made. Default: 15
None