put_object(**kwargs)¶Adds an object to a bucket. You must have WRITE permissions on a bucket to add an object to it.
Amazon S3 never adds partial objects; if you receive a success response, Amazon S3 added the entire object to the bucket.
Amazon S3 is a distributed system. If it receives multiple write requests for the same object simultaneously, it overwrites all but the last object written. Amazon S3 does not provide object locking; if you need this, make sure to build it into your application layer or use versioning instead.
To ensure that data is not corrupted traversing the network, use the Content-MD5 header. When you use this header, Amazon S3 checks the object against the provided MD5 value and, if they do not match, returns an error. Additionally, you can calculate the MD5 while putting an object to Amazon S3 and compare the returned ETag to the calculated MD5 value.
Note
- To successfully complete the
PutObjectrequest, you must have thes3:PutObjectin your IAM permissions.- To successfully change the objects acl of your
PutObjectrequest, you must have thes3:PutObjectAclin your IAM permissions.- The
Content-MD5header is required for any request to upload an object with a retention period configured using Amazon S3 Object Lock. For more information about Amazon S3 Object Lock, see Amazon S3 Object Lock Overview in the Amazon S3 User Guide .
Server-side Encryption
You can optionally request server-side encryption. With server-side encryption, Amazon S3 encrypts your data as it writes it to disks in its data centers and decrypts the data when you access it. You have the option to provide your own encryption key or use Amazon Web Services managed encryption keys (SSE-S3 or SSE-KMS). For more information, see Using Server-Side Encryption.
If you request server-side encryption using Amazon Web Services Key Management Service (SSE-KMS), you can enable an S3 Bucket Key at the object-level. For more information, see Amazon S3 Bucket Keys in the Amazon S3 User Guide .
Access Control List (ACL)-Specific Request Headers
You can use headers to grant ACL- based permissions. By default, all objects are private. Only the owner has full access control. When adding a new object, you can grant permissions to individual Amazon Web Services accounts or to predefined groups defined by Amazon S3. These permissions are then added to the ACL on the object. For more information, see Access Control List (ACL) Overview and Managing ACLs Using the REST API.
If the bucket that you're uploading objects to uses the bucket owner enforced setting for S3 Object Ownership, ACLs are disabled and no longer affect permissions. Buckets that use this setting only accept PUT requests that don't specify an ACL or PUT requests that specify bucket owner full control ACLs, such as the bucket-owner-full-control canned ACL or an equivalent form of this ACL expressed in the XML format. PUT requests that contain other ACLs (for example, custom grants to certain Amazon Web Services accounts) fail and return a 400 error with the error code AccessControlListNotSupported .
For more information, see Controlling ownership of objects and disabling ACLs in the Amazon S3 User Guide .
Note
If your bucket uses the bucket owner enforced setting for Object Ownership, all objects written to the bucket by any account will be owned by the bucket owner.
Storage Class Options
By default, Amazon S3 uses the STANDARD Storage Class to store newly created objects. The STANDARD storage class provides high durability and high availability. Depending on performance needs, you can specify a different Storage Class. Amazon S3 on Outposts only uses the OUTPOSTS Storage Class. For more information, see Storage Classes in the Amazon S3 User Guide .
Versioning
If you enable versioning for a bucket, Amazon S3 automatically generates a unique version ID for the object being stored. Amazon S3 returns this ID in the response. When you enable versioning for a bucket, if Amazon S3 receives multiple write requests for the same object simultaneously, it stores all of the objects.
For more information about versioning, see Adding Objects to Versioning Enabled Buckets. For information about returning the versioning state of a bucket, see GetBucketVersioning.
Related Resources
See also: AWS API Documentation
Request Syntax
response = client.put_object(
ACL='private'|'public-read'|'public-read-write'|'authenticated-read'|'aws-exec-read'|'bucket-owner-read'|'bucket-owner-full-control',
Body=b'bytes'|file,
Bucket='string',
CacheControl='string',
ContentDisposition='string',
ContentEncoding='string',
ContentLanguage='string',
ContentLength=123,
ContentMD5='string',
ContentType='string',
ChecksumAlgorithm='CRC32'|'CRC32C'|'SHA1'|'SHA256',
ChecksumCRC32='string',
ChecksumCRC32C='string',
ChecksumSHA1='string',
ChecksumSHA256='string',
Expires=datetime(2015, 1, 1),
GrantFullControl='string',
GrantRead='string',
GrantReadACP='string',
GrantWriteACP='string',
Key='string',
Metadata={
'string': 'string'
},
ServerSideEncryption='AES256'|'aws:kms',
StorageClass='STANDARD'|'REDUCED_REDUNDANCY'|'STANDARD_IA'|'ONEZONE_IA'|'INTELLIGENT_TIERING'|'GLACIER'|'DEEP_ARCHIVE'|'OUTPOSTS'|'GLACIER_IR',
WebsiteRedirectLocation='string',
SSECustomerAlgorithm='string',
SSECustomerKey='string',
SSEKMSKeyId='string',
SSEKMSEncryptionContext='string',
BucketKeyEnabled=True|False,
RequestPayer='requester',
Tagging='string',
ObjectLockMode='GOVERNANCE'|'COMPLIANCE',
ObjectLockRetainUntilDate=datetime(2015, 1, 1),
ObjectLockLegalHoldStatus='ON'|'OFF',
ExpectedBucketOwner='string'
)
The canned ACL to apply to the object. For more information, see Canned ACL.
This action is not supported by Amazon S3 on Outposts.
[REQUIRED]
The bucket name to which the PUT action was initiated.
When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName -AccountId .s3-accesspoint.*Region* .amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide .
When using this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com . When using this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using Amazon S3 on Outposts in the Amazon S3 User Guide .
Indicates the algorithm used to create the checksum for the object when using the SDK. This header will not provide any additional functionality if not using the SDK. When sending this header, there must be a corresponding x-amz-checksum or x-amz-trailer header sent. Otherwise, Amazon S3 fails the request with the HTTP status code 400 Bad Request . For more information, see Checking object integrity in the Amazon S3 User Guide .
If you provide an individual checksum, Amazon S3 ignores any provided ChecksumAlgorithm parameter.
Gives the grantee READ, READ_ACP, and WRITE_ACP permissions on the object.
This action is not supported by Amazon S3 on Outposts.
Allows grantee to read the object data and its metadata.
This action is not supported by Amazon S3 on Outposts.
Allows grantee to read the object ACL.
This action is not supported by Amazon S3 on Outposts.
Allows grantee to write the ACL for the applicable object.
This action is not supported by Amazon S3 on Outposts.
[REQUIRED]
Object key for which the PUT action was initiated.
A map of metadata to store with the object in S3.
If the bucket is configured as a website, redirects requests for this object to another object in the same bucket or to an external URL. Amazon S3 stores the value of this header in the object metadata. For information about object metadata, see Object Key and Metadata.
In the following example, the request header sets the redirect to an object (anotherPage.html) in the same bucket:
x-amz-website-redirect-location: /anotherPage.html
In the following example, the request header sets the object redirect to another website:
x-amz-website-redirect-location: http://www.example.com/
For more information about website hosting in Amazon S3, see Hosting Websites on Amazon S3 and How to Configure Website Page Redirects.
x-amz-server-side-encryption-customer-algorithm header.Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. Amazon S3 uses this header for a message integrity check to ensure that the encryption key was transmitted without error.
Please note that this parameter is automatically populated if it is not provided. Including this parameter is not required
x-amz-server-side-encryption is present and has the value of aws:kms , this header specifies the ID of the Amazon Web Services Key Management Service (Amazon Web Services KMS) symmetrical customer managed key that was used for the object. If you specify x-amz-server-side-encryption:aws:kms , but do not provide x-amz-server-side-encryption-aws-kms-key-id , Amazon S3 uses the Amazon Web Services managed key to protect the data. If the KMS key does not exist in the same account issuing the command, you must use the full ARN and not just the ID.Specifies whether Amazon S3 should use an S3 Bucket Key for object encryption with server-side encryption using AWS KMS (SSE-KMS). Setting this header to true causes Amazon S3 to use an S3 Bucket Key for object encryption with SSE-KMS.
Specifying this header with a PUT action doesn’t affect bucket-level settings for S3 Bucket Key.
403 Forbidden (access denied).dict
Response Syntax
{
'Expiration': 'string',
'ETag': 'string',
'ChecksumCRC32': 'string',
'ChecksumCRC32C': 'string',
'ChecksumSHA1': 'string',
'ChecksumSHA256': 'string',
'ServerSideEncryption': 'AES256'|'aws:kms',
'VersionId': 'string',
'SSECustomerAlgorithm': 'string',
'SSECustomerKeyMD5': 'string',
'SSEKMSKeyId': 'string',
'SSEKMSEncryptionContext': 'string',
'BucketKeyEnabled': True|False,
'RequestCharged': 'requester'
}
Response Structure
(dict) --
Expiration (string) --
If the expiration is configured for the object (see PutBucketLifecycleConfiguration ), the response includes this header. It includes the expiry-date and rule-id key-value pairs that provide information about object expiration. The value of the rule-id is URL-encoded.
ETag (string) --
Entity tag for the uploaded object.
ChecksumCRC32 (string) --
The base64-encoded, 32-bit CRC32 checksum of the object. This will only be present if it was uploaded with the object. With multipart uploads, this may not be a checksum value of the object. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide .
ChecksumCRC32C (string) --
The base64-encoded, 32-bit CRC32C checksum of the object. This will only be present if it was uploaded with the object. With multipart uploads, this may not be a checksum value of the object. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide .
ChecksumSHA1 (string) --
The base64-encoded, 160-bit SHA-1 digest of the object. This will only be present if it was uploaded with the object. With multipart uploads, this may not be a checksum value of the object. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide .
ChecksumSHA256 (string) --
The base64-encoded, 256-bit SHA-256 digest of the object. This will only be present if it was uploaded with the object. With multipart uploads, this may not be a checksum value of the object. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide .
ServerSideEncryption (string) --
If you specified server-side encryption either with an Amazon Web Services KMS key or Amazon S3-managed encryption key in your PUT request, the response includes this header. It confirms the encryption algorithm that Amazon S3 used to encrypt the object.
VersionId (string) --
Version of the object.
SSECustomerAlgorithm (string) --
If server-side encryption with a customer-provided encryption key was requested, the response will include this header confirming the encryption algorithm used.
SSECustomerKeyMD5 (string) --
If server-side encryption with a customer-provided encryption key was requested, the response will include this header to provide round-trip message integrity verification of the customer-provided encryption key.
SSEKMSKeyId (string) --
If x-amz-server-side-encryption is present and has the value of aws:kms , this header specifies the ID of the Amazon Web Services Key Management Service (Amazon Web Services KMS) symmetric customer managed key that was used for the object.
SSEKMSEncryptionContext (string) --
If present, specifies the Amazon Web Services KMS Encryption Context to use for object encryption. The value of this header is a base64-encoded UTF-8 string holding JSON with the encryption context key-value pairs.
BucketKeyEnabled (boolean) --
Indicates whether the uploaded object uses an S3 Bucket Key for server-side encryption with Amazon Web Services KMS (SSE-KMS).
RequestCharged (string) --
If present, indicates that the requester was successfully charged for the request.
Examples
The following example creates an object. If the bucket is versioning enabled, S3 returns version ID in response.
response = client.put_object(
Body='filetoupload',
Bucket='examplebucket',
Key='objectkey',
)
print(response)
Expected Output:
{
'ETag': '"6805f2cfc46c0f04559748bb039d69ae"',
'VersionId': 'Bvq0EDKxOcXLJXNo_Lkz37eM3R4pfzyQ',
'ResponseMetadata': {
'...': '...',
},
}
The following example uploads an object. The request specifies optional request headers to directs S3 to use specific storage class and use server-side encryption.
response = client.put_object(
Body='HappyFace.jpg',
Bucket='examplebucket',
Key='HappyFace.jpg',
ServerSideEncryption='AES256',
StorageClass='STANDARD_IA',
)
print(response)
Expected Output:
{
'ETag': '"6805f2cfc46c0f04559748bb039d69ae"',
'ServerSideEncryption': 'AES256',
'VersionId': 'CG612hodqujkf8FaaNfp8U..FIhLROcp',
'ResponseMetadata': {
'...': '...',
},
}
The following example uploads and object. The request specifies optional canned ACL (access control list) to all READ access to authenticated users. If the bucket is versioning enabled, S3 returns version ID in response.
response = client.put_object(
ACL='authenticated-read',
Body='filetoupload',
Bucket='examplebucket',
Key='exampleobject',
)
print(response)
Expected Output:
{
'ETag': '"6805f2cfc46c0f04559748bb039d69ae"',
'VersionId': 'Kirh.unyZwjQ69YxcQLA8z4F5j3kJJKr',
'ResponseMetadata': {
'...': '...',
},
}
The following example uploads an object to a versioning-enabled bucket. The source file is specified using Windows file syntax. S3 returns VersionId of the newly created object.
response = client.put_object(
Body='HappyFace.jpg',
Bucket='examplebucket',
Key='HappyFace.jpg',
)
print(response)
Expected Output:
{
'ETag': '"6805f2cfc46c0f04559748bb039d69ae"',
'VersionId': 'tpf3zF08nBplQK1XLOefGskR7mGDwcDk',
'ResponseMetadata': {
'...': '...',
},
}
The following example creates an object. The request also specifies optional metadata. If the bucket is versioning enabled, S3 returns version ID in response.
response = client.put_object(
Body='filetoupload',
Bucket='examplebucket',
Key='exampleobject',
Metadata={
'metadata1': 'value1',
'metadata2': 'value2',
},
)
print(response)
Expected Output:
{
'ETag': '"6805f2cfc46c0f04559748bb039d69ae"',
'VersionId': 'pSKidl4pHBiNwukdbcPXAIs.sshFFOc0',
'ResponseMetadata': {
'...': '...',
},
}
The following example uploads an object. The request specifies optional object tags. The bucket is versioned, therefore S3 returns version ID of the newly created object.
response = client.put_object(
Body='c:\HappyFace.jpg',
Bucket='examplebucket',
Key='HappyFace.jpg',
Tagging='key1=value1&key2=value2',
)
print(response)
Expected Output:
{
'ETag': '"6805f2cfc46c0f04559748bb039d69ae"',
'VersionId': 'psM2sYY4.o1501dSx8wMvnkOzSBB.V4a',
'ResponseMetadata': {
'...': '...',
},
}
The following example uploads and object. The request specifies the optional server-side encryption option. The request also specifies optional object tags. If the bucket is versioning enabled, S3 returns version ID in response.
response = client.put_object(
Body='filetoupload',
Bucket='examplebucket',
Key='exampleobject',
ServerSideEncryption='AES256',
Tagging='key1=value1&key2=value2',
)
print(response)
Expected Output:
{
'ETag': '"6805f2cfc46c0f04559748bb039d69ae"',
'ServerSideEncryption': 'AES256',
'VersionId': 'Ri.vC6qVlA4dEnjgRV4ZHsHoFIjqEMNt',
'ResponseMetadata': {
'...': '...',
},
}