retry_build(**kwargs)¶Restarts a build.
See also: AWS API Documentation
Request Syntax
response = client.retry_build(
id='string',
idempotencyToken='string'
)
RetryBuild request. The token is included in the RetryBuild request and is valid for five minutes. If you repeat the RetryBuild request with the same token, but change a parameter, CodeBuild returns a parameter mismatch error.dict
Response Syntax
{
'build': {
'id': 'string',
'arn': 'string',
'buildNumber': 123,
'startTime': datetime(2015, 1, 1),
'endTime': datetime(2015, 1, 1),
'currentPhase': 'string',
'buildStatus': 'SUCCEEDED'|'FAILED'|'FAULT'|'TIMED_OUT'|'IN_PROGRESS'|'STOPPED',
'sourceVersion': 'string',
'resolvedSourceVersion': 'string',
'projectName': 'string',
'phases': [
{
'phaseType': 'SUBMITTED'|'QUEUED'|'PROVISIONING'|'DOWNLOAD_SOURCE'|'INSTALL'|'PRE_BUILD'|'BUILD'|'POST_BUILD'|'UPLOAD_ARTIFACTS'|'FINALIZING'|'COMPLETED',
'phaseStatus': 'SUCCEEDED'|'FAILED'|'FAULT'|'TIMED_OUT'|'IN_PROGRESS'|'STOPPED',
'startTime': datetime(2015, 1, 1),
'endTime': datetime(2015, 1, 1),
'durationInSeconds': 123,
'contexts': [
{
'statusCode': 'string',
'message': 'string'
},
]
},
],
'source': {
'type': 'CODECOMMIT'|'CODEPIPELINE'|'GITHUB'|'S3'|'BITBUCKET'|'GITHUB_ENTERPRISE'|'NO_SOURCE',
'location': 'string',
'gitCloneDepth': 123,
'gitSubmodulesConfig': {
'fetchSubmodules': True|False
},
'buildspec': 'string',
'auth': {
'type': 'OAUTH',
'resource': 'string'
},
'reportBuildStatus': True|False,
'buildStatusConfig': {
'context': 'string',
'targetUrl': 'string'
},
'insecureSsl': True|False,
'sourceIdentifier': 'string'
},
'secondarySources': [
{
'type': 'CODECOMMIT'|'CODEPIPELINE'|'GITHUB'|'S3'|'BITBUCKET'|'GITHUB_ENTERPRISE'|'NO_SOURCE',
'location': 'string',
'gitCloneDepth': 123,
'gitSubmodulesConfig': {
'fetchSubmodules': True|False
},
'buildspec': 'string',
'auth': {
'type': 'OAUTH',
'resource': 'string'
},
'reportBuildStatus': True|False,
'buildStatusConfig': {
'context': 'string',
'targetUrl': 'string'
},
'insecureSsl': True|False,
'sourceIdentifier': 'string'
},
],
'secondarySourceVersions': [
{
'sourceIdentifier': 'string',
'sourceVersion': 'string'
},
],
'artifacts': {
'location': 'string',
'sha256sum': 'string',
'md5sum': 'string',
'overrideArtifactName': True|False,
'encryptionDisabled': True|False,
'artifactIdentifier': 'string',
'bucketOwnerAccess': 'NONE'|'READ_ONLY'|'FULL'
},
'secondaryArtifacts': [
{
'location': 'string',
'sha256sum': 'string',
'md5sum': 'string',
'overrideArtifactName': True|False,
'encryptionDisabled': True|False,
'artifactIdentifier': 'string',
'bucketOwnerAccess': 'NONE'|'READ_ONLY'|'FULL'
},
],
'cache': {
'type': 'NO_CACHE'|'S3'|'LOCAL',
'location': 'string',
'modes': [
'LOCAL_DOCKER_LAYER_CACHE'|'LOCAL_SOURCE_CACHE'|'LOCAL_CUSTOM_CACHE',
]
},
'environment': {
'type': 'WINDOWS_CONTAINER'|'LINUX_CONTAINER'|'LINUX_GPU_CONTAINER'|'ARM_CONTAINER'|'WINDOWS_SERVER_2019_CONTAINER',
'image': 'string',
'computeType': 'BUILD_GENERAL1_SMALL'|'BUILD_GENERAL1_MEDIUM'|'BUILD_GENERAL1_LARGE'|'BUILD_GENERAL1_2XLARGE',
'environmentVariables': [
{
'name': 'string',
'value': 'string',
'type': 'PLAINTEXT'|'PARAMETER_STORE'|'SECRETS_MANAGER'
},
],
'privilegedMode': True|False,
'certificate': 'string',
'registryCredential': {
'credential': 'string',
'credentialProvider': 'SECRETS_MANAGER'
},
'imagePullCredentialsType': 'CODEBUILD'|'SERVICE_ROLE'
},
'serviceRole': 'string',
'logs': {
'groupName': 'string',
'streamName': 'string',
'deepLink': 'string',
's3DeepLink': 'string',
'cloudWatchLogsArn': 'string',
's3LogsArn': 'string',
'cloudWatchLogs': {
'status': 'ENABLED'|'DISABLED',
'groupName': 'string',
'streamName': 'string'
},
's3Logs': {
'status': 'ENABLED'|'DISABLED',
'location': 'string',
'encryptionDisabled': True|False,
'bucketOwnerAccess': 'NONE'|'READ_ONLY'|'FULL'
}
},
'timeoutInMinutes': 123,
'queuedTimeoutInMinutes': 123,
'buildComplete': True|False,
'initiator': 'string',
'vpcConfig': {
'vpcId': 'string',
'subnets': [
'string',
],
'securityGroupIds': [
'string',
]
},
'networkInterface': {
'subnetId': 'string',
'networkInterfaceId': 'string'
},
'encryptionKey': 'string',
'exportedEnvironmentVariables': [
{
'name': 'string',
'value': 'string'
},
],
'reportArns': [
'string',
],
'fileSystemLocations': [
{
'type': 'EFS',
'location': 'string',
'mountPoint': 'string',
'identifier': 'string',
'mountOptions': 'string'
},
],
'debugSession': {
'sessionEnabled': True|False,
'sessionTarget': 'string'
},
'buildBatchArn': 'string'
}
}
Response Structure
(dict) --
build (dict) --
Information about a build.
id (string) --
The unique ID for the build.
arn (string) --
The Amazon Resource Name (ARN) of the build.
buildNumber (integer) --
The number of the build. For each project, the buildNumber of its first build is 1 . The buildNumber of each subsequent build is incremented by 1 . If a build is deleted, the buildNumber of other builds does not change.
startTime (datetime) --
When the build process started, expressed in Unix time format.
endTime (datetime) --
When the build process ended, expressed in Unix time format.
currentPhase (string) --
The current build phase.
buildStatus (string) --
The current status of the build. Valid values include:
FAILED : The build failed.FAULT : The build faulted.IN_PROGRESS : The build is still in progress.STOPPED : The build stopped.SUCCEEDED : The build succeeded.TIMED_OUT : The build timed out.sourceVersion (string) --
Any version identifier for the version of the source code to be built. If sourceVersion is specified at the project level, then this sourceVersion (at the build level) takes precedence.
For more information, see Source Version Sample with CodeBuild in the CodeBuild User Guide .
resolvedSourceVersion (string) --
An identifier for the version of this build's source code.
projectName (string) --
The name of the CodeBuild project.
phases (list) --
Information about all previous build phases that are complete and information about any current build phase that is not yet complete.
(dict) --
Information about a stage for a build.
phaseType (string) --
The name of the build phase. Valid values include:
BUILD
Core build activities typically occur in this build phase.
COMPLETED
The build has been completed.
DOWNLOAD_SOURCE
Source code is being downloaded in this build phase.
FINALIZING
The build process is completing in this build phase.
INSTALL
Installation activities typically occur in this build phase.
POST_BUILD
Post-build activities typically occur in this build phase.
PRE_BUILD
Pre-build activities typically occur in this build phase.
PROVISIONING
The build environment is being set up.
QUEUED
The build has been submitted and is queued behind other submitted builds.
SUBMITTED
The build has been submitted.
UPLOAD_ARTIFACTS
Build output artifacts are being uploaded to the output location.
phaseStatus (string) --
The current status of the build phase. Valid values include:
FAILED
The build phase failed.
FAULT
The build phase faulted.
IN_PROGRESS
The build phase is still in progress.
STOPPED
The build phase stopped.
SUCCEEDED
The build phase succeeded.
TIMED_OUT
The build phase timed out.
startTime (datetime) --
When the build phase started, expressed in Unix time format.
endTime (datetime) --
When the build phase ended, expressed in Unix time format.
durationInSeconds (integer) --
How long, in seconds, between the starting and ending times of the build's phase.
contexts (list) --
Additional information about a build phase, especially to help troubleshoot a failed build.
(dict) --
Additional information about a build phase that has an error. You can use this information for troubleshooting.
statusCode (string) --
The status code for the context of the build phase.
message (string) --
An explanation of the build phase's context. This might include a command ID and an exit code.
source (dict) --
Information about the source code to be built.
type (string) --
The type of repository that contains the source code to be built. Valid values include:
BITBUCKET : The source code is in a Bitbucket repository.CODECOMMIT : The source code is in an CodeCommit repository.CODEPIPELINE : The source code settings are specified in the source action of a pipeline in CodePipeline.GITHUB : The source code is in a GitHub or GitHub Enterprise Cloud repository.GITHUB_ENTERPRISE : The source code is in a GitHub Enterprise Server repository.NO_SOURCE : The project does not have input source code.S3 : The source code is in an Amazon S3 bucket.location (string) --
Information about the location of the source code to be built. Valid values include:
location should not be specified. If it is specified, CodePipeline ignores it. This is because CodePipeline uses the settings in a pipeline's source action instead of this value.https://git-codecommit.<region-ID>.amazonaws.com/v1/repos/<repo-name> ).<bucket-name>/<path>/<object-name>.zip ).<bucket-name>/<path-to-source-code>/<folder>/ ).source object, set the auth object's type value to OAUTH .source object, set the auth object's type value to OAUTH .If you specify CODEPIPELINE for the Type property, don't specify this property. For all of the other types, you must specify Location .
gitCloneDepth (integer) --
Information about the Git clone depth for the build project.
gitSubmodulesConfig (dict) --
Information about the Git submodules configuration for the build project.
fetchSubmodules (boolean) --
Set to true to fetch Git submodules for your CodeBuild build project.
buildspec (string) --
The buildspec file declaration to use for the builds in this build project.
If this value is set, it can be either an inline buildspec definition, the path to an alternate buildspec file relative to the value of the built-in CODEBUILD_SRC_DIR environment variable, or the path to an S3 bucket. The bucket must be in the same Amazon Web Services Region as the build project. Specify the buildspec file using its ARN (for example, arn:aws:s3:::my-codebuild-sample2/buildspec.yml ). If this value is not provided or is set to an empty string, the source code must contain a buildspec file in its root directory. For more information, see Buildspec File Name and Storage Location.
auth (dict) --
Information about the authorization settings for CodeBuild to access the source code to be built.
This information is for the CodeBuild console's use only. Your code should not get or set this information directly.
type (string) --
Note
This data type is deprecated and is no longer accurate or used.
The authorization type to use. The only valid value is OAUTH , which represents the OAuth authorization type.
resource (string) --
The resource value that applies to the specified authorization type.
reportBuildStatus (boolean) --
Set to true to report the status of a build's start and finish to your source provider. This option is valid only when your source provider is GitHub, GitHub Enterprise, or Bitbucket. If this is set and you use a different source provider, an invalidInputException is thrown.
To be able to report the build status to the source provider, the user associated with the source provider must have write access to the repo. If the user does not have write access, the build status cannot be updated. For more information, see Source provider access in the CodeBuild User Guide .
The status of a build triggered by a webhook is always reported to your source provider.
If your project's builds are triggered by a webhook, you must push a new commit to the repo for a change to this property to take effect.
buildStatusConfig (dict) --
Contains information that defines how the build project reports the build status to the source provider. This option is only used when the source provider is GITHUB , GITHUB_ENTERPRISE , or BITBUCKET .
context (string) --
Specifies the context of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.
Bitbucket
This parameter is used for the name parameter in the Bitbucket commit status. For more information, see build in the Bitbucket API documentation.
GitHub/GitHub Enterprise Server
This parameter is used for the context parameter in the GitHub commit status. For more information, see Create a commit status in the GitHub developer guide.
targetUrl (string) --
Specifies the target url of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.
Bitbucket
This parameter is used for the url parameter in the Bitbucket commit status. For more information, see build in the Bitbucket API documentation.
GitHub/GitHub Enterprise Server
This parameter is used for the target_url parameter in the GitHub commit status. For more information, see Create a commit status in the GitHub developer guide.
insecureSsl (boolean) --
Enable this flag to ignore SSL warnings while connecting to the project source code.
sourceIdentifier (string) --
An identifier for this project source. The identifier can only contain alphanumeric characters and underscores, and must be less than 128 characters in length.
secondarySources (list) --
An array of ProjectSource objects.
(dict) --
Information about the build input source code for the build project.
type (string) --
The type of repository that contains the source code to be built. Valid values include:
BITBUCKET : The source code is in a Bitbucket repository.CODECOMMIT : The source code is in an CodeCommit repository.CODEPIPELINE : The source code settings are specified in the source action of a pipeline in CodePipeline.GITHUB : The source code is in a GitHub or GitHub Enterprise Cloud repository.GITHUB_ENTERPRISE : The source code is in a GitHub Enterprise Server repository.NO_SOURCE : The project does not have input source code.S3 : The source code is in an Amazon S3 bucket.location (string) --
Information about the location of the source code to be built. Valid values include:
location should not be specified. If it is specified, CodePipeline ignores it. This is because CodePipeline uses the settings in a pipeline's source action instead of this value.https://git-codecommit.<region-ID>.amazonaws.com/v1/repos/<repo-name> ).<bucket-name>/<path>/<object-name>.zip ).<bucket-name>/<path-to-source-code>/<folder>/ ).source object, set the auth object's type value to OAUTH .source object, set the auth object's type value to OAUTH .If you specify CODEPIPELINE for the Type property, don't specify this property. For all of the other types, you must specify Location .
gitCloneDepth (integer) --
Information about the Git clone depth for the build project.
gitSubmodulesConfig (dict) --
Information about the Git submodules configuration for the build project.
fetchSubmodules (boolean) --
Set to true to fetch Git submodules for your CodeBuild build project.
buildspec (string) --
The buildspec file declaration to use for the builds in this build project.
If this value is set, it can be either an inline buildspec definition, the path to an alternate buildspec file relative to the value of the built-in CODEBUILD_SRC_DIR environment variable, or the path to an S3 bucket. The bucket must be in the same Amazon Web Services Region as the build project. Specify the buildspec file using its ARN (for example, arn:aws:s3:::my-codebuild-sample2/buildspec.yml ). If this value is not provided or is set to an empty string, the source code must contain a buildspec file in its root directory. For more information, see Buildspec File Name and Storage Location.
auth (dict) --
Information about the authorization settings for CodeBuild to access the source code to be built.
This information is for the CodeBuild console's use only. Your code should not get or set this information directly.
type (string) --
Note
This data type is deprecated and is no longer accurate or used.
The authorization type to use. The only valid value is OAUTH , which represents the OAuth authorization type.
resource (string) --
The resource value that applies to the specified authorization type.
reportBuildStatus (boolean) --
Set to true to report the status of a build's start and finish to your source provider. This option is valid only when your source provider is GitHub, GitHub Enterprise, or Bitbucket. If this is set and you use a different source provider, an invalidInputException is thrown.
To be able to report the build status to the source provider, the user associated with the source provider must have write access to the repo. If the user does not have write access, the build status cannot be updated. For more information, see Source provider access in the CodeBuild User Guide .
The status of a build triggered by a webhook is always reported to your source provider.
If your project's builds are triggered by a webhook, you must push a new commit to the repo for a change to this property to take effect.
buildStatusConfig (dict) --
Contains information that defines how the build project reports the build status to the source provider. This option is only used when the source provider is GITHUB , GITHUB_ENTERPRISE , or BITBUCKET .
context (string) --
Specifies the context of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.
Bitbucket
This parameter is used for the name parameter in the Bitbucket commit status. For more information, see build in the Bitbucket API documentation.
GitHub/GitHub Enterprise Server
This parameter is used for the context parameter in the GitHub commit status. For more information, see Create a commit status in the GitHub developer guide.
targetUrl (string) --
Specifies the target url of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.
Bitbucket
This parameter is used for the url parameter in the Bitbucket commit status. For more information, see build in the Bitbucket API documentation.
GitHub/GitHub Enterprise Server
This parameter is used for the target_url parameter in the GitHub commit status. For more information, see Create a commit status in the GitHub developer guide.
insecureSsl (boolean) --
Enable this flag to ignore SSL warnings while connecting to the project source code.
sourceIdentifier (string) --
An identifier for this project source. The identifier can only contain alphanumeric characters and underscores, and must be less than 128 characters in length.
secondarySourceVersions (list) --
An array of ProjectSourceVersion objects. Each ProjectSourceVersion must be one of:
pr/pull-request-ID (for example, pr/25 ). If a branch name is specified, the branch's HEAD commit ID is used. If not specified, the default branch's HEAD commit ID is used.(dict) --
A source identifier and its corresponding version.
sourceIdentifier (string) --
An identifier for a source in the build project. The identifier can only contain alphanumeric characters and underscores, and must be less than 128 characters in length.
sourceVersion (string) --
The source version for the corresponding source identifier. If specified, must be one of:
pr/pull-request-ID (for example, pr/25 ). If a branch name is specified, the branch's HEAD commit ID is used. If not specified, the default branch's HEAD commit ID is used.For more information, see Source Version Sample with CodeBuild in the CodeBuild User Guide .
artifacts (dict) --
Information about the output artifacts for the build.
location (string) --
Information about the location of the build artifacts.
sha256sum (string) --
The SHA-256 hash of the build artifact.
You can use this hash along with a checksum tool to confirm file integrity and authenticity.
Note
This value is available only if the build project's packaging value is set to ZIP .
md5sum (string) --
The MD5 hash of the build artifact.
You can use this hash along with a checksum tool to confirm file integrity and authenticity.
Note
This value is available only if the build project's packaging value is set to ZIP .
overrideArtifactName (boolean) --
If this flag is set, a name specified in the buildspec file overrides the artifact name. The name specified in a buildspec file is calculated at build time and uses the Shell Command Language. For example, you can append a date and time to your artifact name so that it is always unique.
encryptionDisabled (boolean) --
Information that tells you if encryption for build artifacts is disabled.
artifactIdentifier (string) --
An identifier for this artifact definition.
bucketOwnerAccess (string) --
Specifies the bucket owner's access for objects that another account uploads to their Amazon S3 bucket. By default, only the account that uploads the objects to the bucket has access to these objects. This property allows you to give the bucket owner access to these objects.
Note
To use this property, your CodeBuild service role must have the s3:PutBucketAcl permission. This permission allows CodeBuild to modify the access control list for the bucket.
This property can be one of the following values:
NONE
The bucket owner does not have access to the objects. This is the default.
READ_ONLY
The bucket owner has read-only access to the objects. The uploading account retains ownership of the objects.
FULL
The bucket owner has full access to the objects. Object ownership is determined by the following criteria:
For more information about Amazon S3 object ownership, see Controlling ownership of uploaded objects using S3 Object Ownership in the Amazon Simple Storage Service User Guide .
secondaryArtifacts (list) --
An array of ProjectArtifacts objects.
(dict) --
Information about build output artifacts.
location (string) --
Information about the location of the build artifacts.
sha256sum (string) --
The SHA-256 hash of the build artifact.
You can use this hash along with a checksum tool to confirm file integrity and authenticity.
Note
This value is available only if the build project's packaging value is set to ZIP .
md5sum (string) --
The MD5 hash of the build artifact.
You can use this hash along with a checksum tool to confirm file integrity and authenticity.
Note
This value is available only if the build project's packaging value is set to ZIP .
overrideArtifactName (boolean) --
If this flag is set, a name specified in the buildspec file overrides the artifact name. The name specified in a buildspec file is calculated at build time and uses the Shell Command Language. For example, you can append a date and time to your artifact name so that it is always unique.
encryptionDisabled (boolean) --
Information that tells you if encryption for build artifacts is disabled.
artifactIdentifier (string) --
An identifier for this artifact definition.
bucketOwnerAccess (string) --
Specifies the bucket owner's access for objects that another account uploads to their Amazon S3 bucket. By default, only the account that uploads the objects to the bucket has access to these objects. This property allows you to give the bucket owner access to these objects.
Note
To use this property, your CodeBuild service role must have the s3:PutBucketAcl permission. This permission allows CodeBuild to modify the access control list for the bucket.
This property can be one of the following values:
NONE
The bucket owner does not have access to the objects. This is the default.
READ_ONLY
The bucket owner has read-only access to the objects. The uploading account retains ownership of the objects.
FULL
The bucket owner has full access to the objects. Object ownership is determined by the following criteria:
For more information about Amazon S3 object ownership, see Controlling ownership of uploaded objects using S3 Object Ownership in the Amazon Simple Storage Service User Guide .
cache (dict) --
Information about the cache for the build.
type (string) --
The type of cache used by the build project. Valid values include:
NO_CACHE : The build project does not use any cache.S3 : The build project reads and writes from and to S3.LOCAL : The build project stores a cache locally on a build host that is only available to that build host.location (string) --
Information about the cache location:
NO_CACHE or LOCAL : This value is ignored.S3 : This is the S3 bucket name/prefix.modes (list) --
An array of strings that specify the local cache modes. You can use one or more local cache modes at the same time. This is only used for LOCAL cache types.
Possible values are:
LOCAL_SOURCE_CACHE
Caches Git metadata for primary and secondary sources. After the cache is created, subsequent builds pull only the change between commits. This mode is a good choice for projects with a clean working directory and a source that is a large Git repository. If you choose this option and your project does not use a Git repository (GitHub, GitHub Enterprise, or Bitbucket), the option is ignored.
LOCAL_DOCKER_LAYER_CACHE
Caches existing Docker layers. This mode is a good choice for projects that build or pull large Docker images. It can prevent the performance issues caused by pulling large Docker images down from the network.
Note
privileged flag must be set so that your project has the required Docker permissions.LOCAL_CUSTOM_CACHE
Caches directories you specify in the buildspec file. This mode is a good choice if your build scenario is not suited to one of the other three local cache modes. If you use a custom cache:
environment (dict) --
Information about the build environment for this build.
type (string) --
The type of build environment to use for related builds.
ARM_CONTAINER is available only in regions US East (N. Virginia), US East (Ohio), US West (Oregon), EU (Ireland), Asia Pacific (Mumbai), Asia Pacific (Tokyo), Asia Pacific (Sydney), and EU (Frankfurt).LINUX_CONTAINER with compute type build.general1.2xlarge is available only in regions US East (N. Virginia), US East (Ohio), US West (Oregon), Canada (Central), EU (Ireland), EU (London), EU (Frankfurt), Asia Pacific (Tokyo), Asia Pacific (Seoul), Asia Pacific (Singapore), Asia Pacific (Sydney), China (Beijing), and China (Ningxia).LINUX_GPU_CONTAINER is available only in regions US East (N. Virginia), US East (Ohio), US West (Oregon), Canada (Central), EU (Ireland), EU (London), EU (Frankfurt), Asia Pacific (Tokyo), Asia Pacific (Seoul), Asia Pacific (Singapore), Asia Pacific (Sydney) , China (Beijing), and China (Ningxia).WINDOWS_CONTAINER and WINDOWS_SERVER_2019_CONTAINER are available only in regions US East (N. Virginia), US East (Ohio), US West (Oregon), and EU (Ireland).For more information, see Build environment compute types in the CodeBuild user guide .
image (string) --
The image tag or image digest that identifies the Docker image to use for this build project. Use the following formats:
<registry>/<repository>:<tag> . For example, in the Docker repository that CodeBuild uses to manage its Docker images, this would be aws/codebuild/standard:4.0 .<registry>/<repository>@<digest> . For example, to specify an image with the digest "sha256:cbbf2f9a99b47fc460d422812b6a5adff7dfee951d8fa2e4a98caa0382cfbdbf," use <registry>/<repository>@sha256:cbbf2f9a99b47fc460d422812b6a5adff7dfee951d8fa2e4a98caa0382cfbdbf .For more information, see Docker images provided by CodeBuild in the CodeBuild user guide .
computeType (string) --
Information about the compute resources the build project uses. Available values include:
BUILD_GENERAL1_SMALL : Use up to 3 GB memory and 2 vCPUs for builds.BUILD_GENERAL1_MEDIUM : Use up to 7 GB memory and 4 vCPUs for builds.BUILD_GENERAL1_LARGE : Use up to 16 GB memory and 8 vCPUs for builds, depending on your environment type.BUILD_GENERAL1_2XLARGE : Use up to 145 GB memory, 72 vCPUs, and 824 GB of SSD storage for builds. This compute type supports Docker images up to 100 GB uncompressed.If you use BUILD_GENERAL1_LARGE :
LINUX_CONTAINER , you can use up to 15 GB memory and 8 vCPUs for builds.LINUX_GPU_CONTAINER , you can use up to 255 GB memory, 32 vCPUs, and 4 NVIDIA Tesla V100 GPUs for builds.ARM_CONTAINER , you can use up to 16 GB memory and 8 vCPUs on ARM-based processors for builds.For more information, see Build Environment Compute Types in the CodeBuild User Guide.
environmentVariables (list) --
A set of environment variables to make available to builds for this build project.
(dict) --
Information about an environment variable for a build project or a build.
name (string) --
The name or key of the environment variable.
value (string) --
The value of the environment variable.
Warning
We strongly discourage the use of PLAINTEXT environment variables to store sensitive values, especially Amazon Web Services secret key IDs and secret access keys. PLAINTEXT environment variables can be displayed in plain text using the CodeBuild console and the CLI. For sensitive values, we recommend you use an environment variable of type PARAMETER_STORE or SECRETS_MANAGER .
type (string) --
The type of environment variable. Valid values include:
PARAMETER_STORE : An environment variable stored in Systems Manager Parameter Store. To learn how to specify a parameter store environment variable, see env/parameter-store in the CodeBuild User Guide .PLAINTEXT : An environment variable in plain text format. This is the default value.SECRETS_MANAGER : An environment variable stored in Secrets Manager. To learn how to specify a secrets manager environment variable, see env/secrets-manager in the CodeBuild User Guide .privilegedMode (boolean) --
Enables running the Docker daemon inside a Docker container. Set to true only if the build project is used to build Docker images. Otherwise, a build that attempts to interact with the Docker daemon fails. The default setting is false .
You can initialize the Docker daemon during the install phase of your build by adding one of the following sets of commands to the install phase of your buildspec file:
If the operating system's base image is Ubuntu Linux:
- nohup /usr/local/bin/dockerd --host=unix:///var/run/docker.sock --host=tcp://0.0.0.0:2375 --storage-driver=overlay&
- timeout 15 sh -c "until docker info; do echo .; sleep 1; done"
If the operating system's base image is Alpine Linux and the previous command does not work, add the -t argument to timeout :
- nohup /usr/local/bin/dockerd --host=unix:///var/run/docker.sock --host=tcp://0.0.0.0:2375 --storage-driver=overlay&
- timeout -t 15 sh -c "until docker info; do echo .; sleep 1; done"
certificate (string) --
The ARN of the Amazon S3 bucket, path prefix, and object key that contains the PEM-encoded certificate for the build project. For more information, see certificate in the CodeBuild User Guide .
registryCredential (dict) --
The credentials for access to a private registry.
credential (string) --
The Amazon Resource Name (ARN) or name of credentials created using Secrets Manager.
Note
The credential can use the name of the credentials only if they exist in your current Amazon Web Services Region.
credentialProvider (string) --
The service that created the credentials to access a private Docker registry. The valid value, SECRETS_MANAGER, is for Secrets Manager.
imagePullCredentialsType (string) --
The type of credentials CodeBuild uses to pull images in your build. There are two valid values:
CODEBUILD specifies that CodeBuild uses its own credentials. This requires that you modify your ECR repository policy to trust CodeBuild service principal.SERVICE_ROLE specifies that CodeBuild uses your build project's service role.When you use a cross-account or private registry image, you must use SERVICE_ROLE credentials. When you use an CodeBuild curated image, you must use CODEBUILD credentials.
serviceRole (string) --
The name of a service role used for this build.
logs (dict) --
Information about the build's logs in CloudWatch Logs.
groupName (string) --
The name of the CloudWatch Logs group for the build logs.
streamName (string) --
The name of the CloudWatch Logs stream for the build logs.
deepLink (string) --
The URL to an individual build log in CloudWatch Logs.
s3DeepLink (string) --
The URL to a build log in an S3 bucket.
cloudWatchLogsArn (string) --
The ARN of CloudWatch Logs for a build project. Its format is arn:${Partition}:logs:${Region}:${Account}:log-group:${LogGroupName}:log-stream:${LogStreamName} . For more information, see Resources Defined by CloudWatch Logs.
s3LogsArn (string) --
The ARN of S3 logs for a build project. Its format is arn:${Partition}:s3:::${BucketName}/${ObjectName} . For more information, see Resources Defined by Amazon S3.
cloudWatchLogs (dict) --
Information about CloudWatch Logs for a build project.
status (string) --
The current status of the logs in CloudWatch Logs for a build project. Valid values are:
ENABLED : CloudWatch Logs are enabled for this build project.DISABLED : CloudWatch Logs are not enabled for this build project.groupName (string) --
The group name of the logs in CloudWatch Logs. For more information, see Working with Log Groups and Log Streams.
streamName (string) --
The prefix of the stream name of the CloudWatch Logs. For more information, see Working with Log Groups and Log Streams.
s3Logs (dict) --
Information about S3 logs for a build project.
status (string) --
The current status of the S3 build logs. Valid values are:
ENABLED : S3 build logs are enabled for this build project.DISABLED : S3 build logs are not enabled for this build project.location (string) --
The ARN of an S3 bucket and the path prefix for S3 logs. If your Amazon S3 bucket name is my-bucket , and your path prefix is build-log , then acceptable formats are my-bucket/build-log or arn:aws:s3:::my-bucket/build-log .
encryptionDisabled (boolean) --
Set to true if you do not want your S3 build log output encrypted. By default S3 build logs are encrypted.
bucketOwnerAccess (string) --
Specifies the bucket owner's access for objects that another account uploads to their Amazon S3 bucket. By default, only the account that uploads the objects to the bucket has access to these objects. This property allows you to give the bucket owner access to these objects.
Note
To use this property, your CodeBuild service role must have the s3:PutBucketAcl permission. This permission allows CodeBuild to modify the access control list for the bucket.
This property can be one of the following values:
NONE
The bucket owner does not have access to the objects. This is the default.
READ_ONLY
The bucket owner has read-only access to the objects. The uploading account retains ownership of the objects.
FULL
The bucket owner has full access to the objects. Object ownership is determined by the following criteria:
For more information about Amazon S3 object ownership, see Controlling ownership of uploaded objects using S3 Object Ownership in the Amazon Simple Storage Service User Guide .
timeoutInMinutes (integer) --
How long, in minutes, for CodeBuild to wait before timing out this build if it does not get marked as completed.
queuedTimeoutInMinutes (integer) --
The number of minutes a build is allowed to be queued before it times out.
buildComplete (boolean) --
Whether the build is complete. True if complete; otherwise, false.
initiator (string) --
The entity that started the build. Valid values include:
codepipeline/my-demo-pipeline ).MyUserName ).CodeBuild-Jenkins-Plugin .vpcConfig (dict) --
If your CodeBuild project accesses resources in an Amazon VPC, you provide this parameter that identifies the VPC ID and the list of security group IDs and subnet IDs. The security groups and subnets must belong to the same VPC. You must provide at least one security group and one subnet ID.
vpcId (string) --
The ID of the Amazon VPC.
subnets (list) --
A list of one or more subnet IDs in your Amazon VPC.
securityGroupIds (list) --
A list of one or more security groups IDs in your Amazon VPC.
networkInterface (dict) --
Describes a network interface.
subnetId (string) --
The ID of the subnet.
networkInterfaceId (string) --
The ID of the network interface.
encryptionKey (string) --
The Key Management Service customer master key (CMK) to be used for encrypting the build output artifacts.
Note
You can use a cross-account KMS key to encrypt the build output artifacts if your service role has permission to that key.
You can specify either the Amazon Resource Name (ARN) of the CMK or, if available, the CMK's alias (using the format alias/<alias-name> ).
exportedEnvironmentVariables (list) --
A list of exported environment variables for this build.
Exported environment variables are used in conjunction with CodePipeline to export environment variables from the current build stage to subsequent stages in the pipeline. For more information, see Working with variables in the CodePipeline User Guide .
(dict) --
Contains information about an exported environment variable.
Exported environment variables are used in conjunction with CodePipeline to export environment variables from the current build stage to subsequent stages in the pipeline. For more information, see Working with variables in the CodePipeline User Guide .
Note
During a build, the value of a variable is available starting with the install phase. It can be updated between the start of the install phase and the end of the post_build phase. After the post_build phase ends, the value of exported variables cannot change.
name (string) --
The name of the exported environment variable.
value (string) --
The value assigned to the exported environment variable.
reportArns (list) --
An array of the ARNs associated with this build's reports.
fileSystemLocations (list) --
An array of ProjectFileSystemLocation objects for a CodeBuild build project. A ProjectFileSystemLocation object specifies the identifier , location , mountOptions , mountPoint , and type of a file system created using Amazon Elastic File System.
(dict) --
Information about a file system created by Amazon Elastic File System (EFS). For more information, see What Is Amazon Elastic File System?
type (string) --
The type of the file system. The one supported type is EFS .
location (string) --
A string that specifies the location of the file system created by Amazon EFS. Its format is efs-dns-name:/directory-path . You can find the DNS name of file system when you view it in the Amazon EFS console. The directory path is a path to a directory in the file system that CodeBuild mounts. For example, if the DNS name of a file system is fs-abcd1234.efs.us-west-2.amazonaws.com , and its mount directory is my-efs-mount-directory , then the location is fs-abcd1234.efs.us-west-2.amazonaws.com:/my-efs-mount-directory .
The directory path in the format efs-dns-name:/directory-path is optional. If you do not specify a directory path, the location is only the DNS name and CodeBuild mounts the entire file system.
mountPoint (string) --
The location in the container where you mount the file system.
identifier (string) --
The name used to access a file system created by Amazon EFS. CodeBuild creates an environment variable by appending the identifier in all capital letters to CODEBUILD_ . For example, if you specify my_efs for identifier , a new environment variable is create named CODEBUILD_MY_EFS .
The identifier is used to mount your file system.
mountOptions (string) --
The mount options for a file system created by Amazon EFS. The default mount options used by CodeBuild are nfsvers=4.1,rsize=1048576,wsize=1048576,hard,timeo=600,retrans=2 . For more information, see Recommended NFS Mount Options.
debugSession (dict) --
Contains information about the debug session for this build.
sessionEnabled (boolean) --
Specifies if session debugging is enabled for this build.
sessionTarget (string) --
Contains the identifier of the Session Manager session used for the build. To work with the paused build, you open this session to examine, control, and resume the build.
buildBatchArn (string) --
The ARN of the batch build that this build is a member of, if applicable.
Exceptions
CodeBuild.Client.exceptions.InvalidInputExceptionCodeBuild.Client.exceptions.ResourceNotFoundExceptionCodeBuild.Client.exceptions.AccountLimitExceededException