ElastiCache / Client / modify_cache_cluster

modify_cache_cluster#

ElastiCache.Client.modify_cache_cluster(**kwargs)#

Modifies the settings for a cluster. You can use this operation to change one or more cluster configuration parameters by specifying the parameters and the new values.

See also: AWS API Documentation

Request Syntax

response = client.modify_cache_cluster(
    CacheClusterId='string',
    NumCacheNodes=123,
    CacheNodeIdsToRemove=[
        'string',
    ],
    AZMode='single-az'|'cross-az',
    NewAvailabilityZones=[
        'string',
    ],
    CacheSecurityGroupNames=[
        'string',
    ],
    SecurityGroupIds=[
        'string',
    ],
    PreferredMaintenanceWindow='string',
    NotificationTopicArn='string',
    CacheParameterGroupName='string',
    NotificationTopicStatus='string',
    ApplyImmediately=True|False,
    EngineVersion='string',
    AutoMinorVersionUpgrade=True|False,
    SnapshotRetentionLimit=123,
    SnapshotWindow='string',
    CacheNodeType='string',
    AuthToken='string',
    AuthTokenUpdateStrategy='SET'|'ROTATE'|'DELETE',
    LogDeliveryConfigurations=[
        {
            'LogType': 'slow-log'|'engine-log',
            'DestinationType': 'cloudwatch-logs'|'kinesis-firehose',
            'DestinationDetails': {
                'CloudWatchLogsDetails': {
                    'LogGroup': 'string'
                },
                'KinesisFirehoseDetails': {
                    'DeliveryStream': 'string'
                }
            },
            'LogFormat': 'text'|'json',
            'Enabled': True|False
        },
    ],
    IpDiscovery='ipv4'|'ipv6'
)

Parameters:

CacheClusterId (string) –
[REQUIRED]

The cluster identifier. This value is stored as a lowercase string.
NumCacheNodes (integer) –
The number of cache nodes that the cluster should have. If the value for NumCacheNodes is greater than the sum of the number of current cache nodes and the number of cache nodes pending creation (which may be zero), more nodes are added. If the value is less than the number of existing cache nodes, nodes are removed. If the value is equal to the number of current cache nodes, any pending add or remove requests are canceled.

If you are removing cache nodes, you must use the CacheNodeIdsToRemove parameter to provide the IDs of the specific cache nodes to remove.

For clusters running Redis, this value must be 1. For clusters running Memcached, this value must be between 1 and 40.

Note

Adding or removing Memcached cache nodes can be applied immediately or as a pending operation (see ApplyImmediately).

A pending operation to modify the number of cache nodes in a cluster during its maintenance window, whether by adding or removing nodes in accordance with the scale out architecture, is not queued. The customer’s latest request to add or remove nodes to the cluster overrides any previous pending operations to modify the number of cache nodes in the cluster. For example, a request to remove 2 nodes would override a previous pending operation to remove 3 nodes. Similarly, a request to add 2 nodes would override a previous pending operation to remove 3 nodes and vice versa. As Memcached cache nodes may now be provisioned in different Availability Zones with flexible cache node placement, a request to add nodes does not automatically override a previous pending operation to add nodes. The customer can modify the previous pending operation to add more nodes or explicitly cancel the pending request and retry the new request. To cancel pending operations to modify the number of cache nodes in a cluster, use the ModifyCacheCluster request and set NumCacheNodes equal to the number of cache nodes currently in the cluster.
CacheNodeIdsToRemove (list) –
A list of cache node IDs to be removed. A node ID is a numeric identifier (0001, 0002, etc.). This parameter is only valid when NumCacheNodes is less than the existing number of cache nodes. The number of cache node IDs supplied in this parameter must match the difference between the existing number of cache nodes in the cluster or pending cache nodes, whichever is greater, and the value of NumCacheNodes in the request.

For example: If you have 3 active cache nodes, 7 pending cache nodes, and the number of cache nodes in this ModifyCacheCluster call is 5, you must list 2 (7 - 5) cache node IDs to remove.
- (string) –
AZMode (string) –
Specifies whether the new nodes in this Memcached cluster are all created in a single Availability Zone or created across multiple Availability Zones.

Valid values: single-az | cross-az.

This option is only supported for Memcached clusters.

Note

You cannot specify single-az if the Memcached cluster already has cache nodes in different Availability Zones. If cross-az is specified, existing Memcached nodes remain in their current Availability Zone.

Only newly created nodes are located in different Availability Zones.
NewAvailabilityZones (list) –

Note

This option is only supported on Memcached clusters.

The list of Availability Zones where the new Memcached cache nodes are created.

This parameter is only valid when NumCacheNodes in the request is greater than the sum of the number of active cache nodes and the number of cache nodes pending creation (which may be zero). The number of Availability Zones supplied in this list must match the cache nodes being added in this request.

Scenarios:
- Scenario 1: You have 3 active nodes and wish to add 2 nodes. Specify NumCacheNodes=5 (3 + 2) and optionally specify two Availability Zones for the two new nodes.
- Scenario 2: You have 3 active nodes and 2 nodes pending creation (from the scenario 1 call) and want to add 1 more node. Specify NumCacheNodes=6 ((3 + 2) + 1) and optionally specify an Availability Zone for the new node.
- Scenario 3: You want to cancel all pending operations. Specify NumCacheNodes=3 to cancel all pending operations.
The Availability Zone placement of nodes pending creation cannot be modified. If you wish to cancel any nodes pending creation, add 0 nodes by setting NumCacheNodes to the number of current nodes.

If cross-az is specified, existing Memcached nodes remain in their current Availability Zone. Only newly created nodes can be located in different Availability Zones. For guidance on how to move existing Memcached nodes to different Availability Zones, see the Availability Zone Considerations section of Cache Node Considerations for Memcached.

Impact of new add/remove requests upon pending requests
- Scenario-1
  - Pending Action: Delete
  - New Request: Delete
  - Result: The new delete, pending or immediate, replaces the pending delete.
- Scenario-2
  - Pending Action: Delete
  - New Request: Create
  - Result: The new create, pending or immediate, replaces the pending delete.
- Scenario-3
  - Pending Action: Create
  - New Request: Delete
  - Result: The new delete, pending or immediate, replaces the pending create.
- Scenario-4
  - Pending Action: Create
  - New Request: Create
  - Result: The new create is added to the pending create.
  Warning
  
  Important: If the new create request is Apply Immediately - Yes, all creates are performed immediately. If the new create request is Apply Immediately - No, all creates are pending.
- (string) –
CacheSecurityGroupNames (list) –
A list of cache security group names to authorize on this cluster. This change is asynchronously applied as soon as possible.

You can use this parameter only with clusters that are created outside of an Amazon Virtual Private Cloud (Amazon VPC).

Constraints: Must contain no more than 255 alphanumeric characters. Must not be “Default”.
- (string) –
SecurityGroupIds (list) –
Specifies the VPC Security Groups associated with the cluster.

This parameter can be used only with clusters that are created in an Amazon Virtual Private Cloud (Amazon VPC).
- (string) –
PreferredMaintenanceWindow (string) –
Specifies the weekly time range during which maintenance on the cluster is performed. It is specified as a range in the format ddd:hh24:mi-ddd:hh24:mi (24H Clock UTC). The minimum maintenance window is a 60 minute period.

Valid values for ddd are:
- sun
- mon
- tue
- wed
- thu
- fri
- sat
Example: sun:23:00-mon:01:30
NotificationTopicArn (string) –
The Amazon Resource Name (ARN) of the Amazon SNS topic to which notifications are sent.

Note

The Amazon SNS topic owner must be same as the cluster owner.
CacheParameterGroupName (string) – The name of the cache parameter group to apply to this cluster. This change is asynchronously applied as soon as possible for parameters when the ApplyImmediately parameter is specified as true for this request.
NotificationTopicStatus (string) –
The status of the Amazon SNS notification topic. Notifications are sent only if the status is active.

Valid values: active | inactive
ApplyImmediately (boolean) –
If true, this parameter causes the modifications in this request and any pending modifications to be applied, asynchronously and as soon as possible, regardless of the PreferredMaintenanceWindow setting for the cluster.

If false, changes to the cluster are applied on the next maintenance reboot, or the next failure reboot, whichever occurs first.

Warning

If you perform a ModifyCacheCluster before a pending modification is applied, the pending modification is replaced by the newer modification.

Valid values: true | false

Default: false
EngineVersion (string) –
The upgraded version of the cache engine to be run on the cache nodes.

Important: You can upgrade to a newer engine version (see Selecting a Cache Engine and Version), but you cannot downgrade to an earlier engine version. If you want to use an earlier engine version, you must delete the existing cluster and create it anew with the earlier engine version.
AutoMinorVersionUpgrade (boolean) – If you are running Redis engine version 6.0 or later, set this parameter to yes if you want to opt-in to the next auto minor version upgrade campaign. This parameter is disabled for previous versions.
SnapshotRetentionLimit (integer) –
The number of days for which ElastiCache retains automatic cluster snapshots before deleting them. For example, if you set SnapshotRetentionLimit to 5, a snapshot that was taken today is retained for 5 days before being deleted.

Note

If the value of SnapshotRetentionLimit is set to zero (0), backups are turned off.
SnapshotWindow (string) – The daily time range (in UTC) during which ElastiCache begins taking a daily snapshot of your cluster.
CacheNodeType (string) – A valid cache node type that you want to scale this cluster up to.
AuthToken (string) –
Reserved parameter. The password used to access a password protected server. This parameter must be specified with the auth-token-update parameter. Password constraints:
- Must be only printable ASCII characters
- Must be at least 16 characters and no more than 128 characters in length
- Cannot contain any of the following characters: ‘/’, ‘”’, or ‘@’, ‘%’
For more information, see AUTH password at AUTH.
AuthTokenUpdateStrategy (string) –
Specifies the strategy to use to update the AUTH token. This parameter must be specified with the auth-token parameter. Possible values:
- Rotate
- Set
For more information, see Authenticating Users with Redis AUTH
LogDeliveryConfigurations (list) –
Specifies the destination, format and type of the logs.
- (dict) –
  
  Specifies the destination, format and type of the logs.
  - LogType (string) –
    
    Refers to slow-log or engine-log..
  - DestinationType (string) –
    
    Specify either cloudwatch-logs or kinesis-firehose as the destination type.
  - DestinationDetails (dict) –
    
    Configuration details of either a CloudWatch Logs destination or Kinesis Data Firehose destination.
    - CloudWatchLogsDetails (dict) –
      
      The configuration details of the CloudWatch Logs destination.
      - LogGroup (string) –
        
        The name of the CloudWatch Logs log group.
    - KinesisFirehoseDetails (dict) –
      
      The configuration details of the Kinesis Data Firehose destination.
      - DeliveryStream (string) –
        
        The name of the Kinesis Data Firehose delivery stream.
  - LogFormat (string) –
    
    Specifies either JSON or TEXT
  - Enabled (boolean) –
    
    Specify if log delivery is enabled. Default true.
IpDiscovery (string) – The network type you choose when modifying a cluster, either ipv4 | ipv6. IPv6 is supported for workloads using Redis engine version 6.2 onward or Memcached engine version 1.6.6 on all instances built on the Nitro system.

Return type:

dict

Returns:

Response Syntax

{
    'CacheCluster': {
        'CacheClusterId': 'string',
        'ConfigurationEndpoint': {
            'Address': 'string',
            'Port': 123
        },
        'ClientDownloadLandingPage': 'string',
        'CacheNodeType': 'string',
        'Engine': 'string',
        'EngineVersion': 'string',
        'CacheClusterStatus': 'string',
        'NumCacheNodes': 123,
        'PreferredAvailabilityZone': 'string',
        'PreferredOutpostArn': 'string',
        'CacheClusterCreateTime': datetime(2015, 1, 1),
        'PreferredMaintenanceWindow': 'string',
        'PendingModifiedValues': {
            'NumCacheNodes': 123,
            'CacheNodeIdsToRemove': [
                'string',
            ],
            'EngineVersion': 'string',
            'CacheNodeType': 'string',
            'AuthTokenStatus': 'SETTING'|'ROTATING',
            'LogDeliveryConfigurations': [
                {
                    'LogType': 'slow-log'|'engine-log',
                    'DestinationType': 'cloudwatch-logs'|'kinesis-firehose',
                    'DestinationDetails': {
                        'CloudWatchLogsDetails': {
                            'LogGroup': 'string'
                        },
                        'KinesisFirehoseDetails': {
                            'DeliveryStream': 'string'
                        }
                    },
                    'LogFormat': 'text'|'json'
                },
            ],
            'TransitEncryptionEnabled': True|False,
            'TransitEncryptionMode': 'preferred'|'required'
        },
        'NotificationConfiguration': {
            'TopicArn': 'string',
            'TopicStatus': 'string'
        },
        'CacheSecurityGroups': [
            {
                'CacheSecurityGroupName': 'string',
                'Status': 'string'
            },
        ],
        'CacheParameterGroup': {
            'CacheParameterGroupName': 'string',
            'ParameterApplyStatus': 'string',
            'CacheNodeIdsToReboot': [
                'string',
            ]
        },
        'CacheSubnetGroupName': 'string',
        'CacheNodes': [
            {
                'CacheNodeId': 'string',
                'CacheNodeStatus': 'string',
                'CacheNodeCreateTime': datetime(2015, 1, 1),
                'Endpoint': {
                    'Address': 'string',
                    'Port': 123
                },
                'ParameterGroupStatus': 'string',
                'SourceCacheNodeId': 'string',
                'CustomerAvailabilityZone': 'string',
                'CustomerOutpostArn': 'string'
            },
        ],
        'AutoMinorVersionUpgrade': True|False,
        'SecurityGroups': [
            {
                'SecurityGroupId': 'string',
                'Status': 'string'
            },
        ],
        'ReplicationGroupId': 'string',
        'SnapshotRetentionLimit': 123,
        'SnapshotWindow': 'string',
        'AuthTokenEnabled': True|False,
        'AuthTokenLastModifiedDate': datetime(2015, 1, 1),
        'TransitEncryptionEnabled': True|False,
        'AtRestEncryptionEnabled': True|False,
        'ARN': 'string',
        'ReplicationGroupLogDeliveryEnabled': True|False,
        'LogDeliveryConfigurations': [
            {
                'LogType': 'slow-log'|'engine-log',
                'DestinationType': 'cloudwatch-logs'|'kinesis-firehose',
                'DestinationDetails': {
                    'CloudWatchLogsDetails': {
                        'LogGroup': 'string'
                    },
                    'KinesisFirehoseDetails': {
                        'DeliveryStream': 'string'
                    }
                },
                'LogFormat': 'text'|'json',
                'Status': 'active'|'enabling'|'modifying'|'disabling'|'error',
                'Message': 'string'
            },
        ],
        'NetworkType': 'ipv4'|'ipv6'|'dual_stack',
        'IpDiscovery': 'ipv4'|'ipv6',
        'TransitEncryptionMode': 'preferred'|'required'
    }
}

Response Structure

(dict) –
- CacheCluster (dict) –
  
  Contains all of the attributes of a specific cluster.
  - CacheClusterId (string) –
    
    The user-supplied identifier of the cluster. This identifier is a unique key that identifies a cluster.
  - ConfigurationEndpoint (dict) –
    
    Represents a Memcached cluster endpoint which can be used by an application to connect to any node in the cluster. The configuration endpoint will always have .cfg in it.
    
    Example: mem-3.9dvc4r.cfg.usw2.cache.amazonaws.com:11211
    - Address (string) –
      
      The DNS hostname of the cache node.
    - Port (integer) –
      
      The port number that the cache engine is listening on.
  - ClientDownloadLandingPage (string) –
    
    The URL of the web page where you can download the latest ElastiCache client library.
  - CacheNodeType (string) –
    
    The name of the compute and memory capacity node type for the cluster.
    
    The following node types are supported by ElastiCache. Generally speaking, the current generation types provide more memory and computational power at lower cost when compared to their equivalent previous generation counterparts.
    - General purpose:
      - Current generation: M6g node types (available only for Redis engine version 5.0.6 onward and for Memcached engine version 1.5.16 onward): cache.m6g.large, cache.m6g.xlarge, cache.m6g.2xlarge, cache.m6g.4xlarge, cache.m6g.8xlarge, cache.m6g.12xlarge, cache.m6g.16xlarge
      Note
      
      For region availability, see Supported Node Types
      
      M5 node types: cache.m5.large, cache.m5.xlarge, cache.m5.2xlarge, cache.m5.4xlarge, cache.m5.12xlarge, cache.m5.24xlarge M4 node types: cache.m4.large, cache.m4.xlarge, cache.m4.2xlarge, cache.m4.4xlarge, cache.m4.10xlarge T4g node types (available only for Redis engine version 5.0.6 onward and Memcached engine version 1.5.16 onward): cache.t4g.micro, cache.t4g.small, cache.t4g.medium T3 node types: cache.t3.micro, cache.t3.small, cache.t3.medium T2 node types: cache.t2.micro, cache.t2.small, cache.t2.medium
      - Previous generation: (not recommended. Existing clusters are still supported but creation of new clusters is not supported for these types.) T1 node types: cache.t1.micro M1 node types: cache.m1.small, cache.m1.medium, cache.m1.large, cache.m1.xlarge M3 node types: cache.m3.medium, cache.m3.large, cache.m3.xlarge, cache.m3.2xlarge
    - Compute optimized:
      - Previous generation: (not recommended. Existing clusters are still supported but creation of new clusters is not supported for these types.) C1 node types: cache.c1.xlarge
    - Memory optimized:
      - Current generation: R6g node types (available only for Redis engine version 5.0.6 onward and for Memcached engine version 1.5.16 onward). cache.r6g.large, cache.r6g.xlarge, cache.r6g.2xlarge, cache.r6g.4xlarge, cache.r6g.8xlarge, cache.r6g.12xlarge, cache.r6g.16xlarge
      Note
      
      For region availability, see Supported Node Types
      
      R5 node types: cache.r5.large, cache.r5.xlarge, cache.r5.2xlarge, cache.r5.4xlarge, cache.r5.12xlarge, cache.r5.24xlarge R4 node types: cache.r4.large, cache.r4.xlarge, cache.r4.2xlarge, cache.r4.4xlarge, cache.r4.8xlarge, cache.r4.16xlarge
      - Previous generation: (not recommended. Existing clusters are still supported but creation of new clusters is not supported for these types.) M2 node types: cache.m2.xlarge, cache.m2.2xlarge, cache.m2.4xlarge R3 node types: cache.r3.large, cache.r3.xlarge, cache.r3.2xlarge, cache.r3.4xlarge, cache.r3.8xlarge
    Additional node type info
    - All current generation instance types are created in Amazon VPC by default.
    - Redis append-only files (AOF) are not supported for T1 or T2 instances.
    - Redis Multi-AZ with automatic failover is not supported on T1 instances.
    - Redis configuration variables appendonly and appendfsync are not supported on Redis version 2.8.22 and later.
  - Engine (string) –
    
    The name of the cache engine ( memcached or redis) to be used for this cluster.
  - EngineVersion (string) –
    
    The version of the cache engine that is used in this cluster.
  - CacheClusterStatus (string) –
    
    The current state of this cluster, one of the following values: available, creating, deleted, deleting, incompatible-network, modifying, rebooting cluster nodes, restore-failed, or snapshotting.
  - NumCacheNodes (integer) –
    
    The number of cache nodes in the cluster.
    
    For clusters running Redis, this value must be 1. For clusters running Memcached, this value must be between 1 and 40.
  - PreferredAvailabilityZone (string) –
    
    The name of the Availability Zone in which the cluster is located or “Multiple” if the cache nodes are located in different Availability Zones.
  - PreferredOutpostArn (string) –
    
    The outpost ARN in which the cache cluster is created.
  - CacheClusterCreateTime (datetime) –
    
    The date and time when the cluster was created.
  - PreferredMaintenanceWindow (string) –
    
    Specifies the weekly time range during which maintenance on the cluster is performed. It is specified as a range in the format ddd:hh24:mi-ddd:hh24:mi (24H Clock UTC). The minimum maintenance window is a 60 minute period.
    
    Valid values for ddd are:
    - sun
    - mon
    - tue
    - wed
    - thu
    - fri
    - sat
    Example: sun:23:00-mon:01:30
  - PendingModifiedValues (dict) –
    
    A group of settings that are applied to the cluster in the future, or that are currently being applied.
    - NumCacheNodes (integer) –
      
      The new number of cache nodes for the cluster.
      
      For clusters running Redis, this value must be 1. For clusters running Memcached, this value must be between 1 and 40.
    - CacheNodeIdsToRemove (list) –
      
      A list of cache node IDs that are being removed (or will be removed) from the cluster. A node ID is a 4-digit numeric identifier (0001, 0002, etc.).
      - (string) –
    - EngineVersion (string) –
      
      The new cache engine version that the cluster runs.
    - CacheNodeType (string) –
      
      The cache node type that this cluster or replication group is scaled to.
    - AuthTokenStatus (string) –
      
      The auth token status
    - LogDeliveryConfigurations (list) –
      
      The log delivery configurations being modified
      - (dict) –
        
        The log delivery configurations being modified
        
        LogType (string) –
        
        Refers to slow-log or engine-log..
        
        DestinationType (string) –
        
        Returns the destination type, either CloudWatch Logs or Kinesis Data Firehose.
        
        DestinationDetails (dict) –
        
        Configuration details of either a CloudWatch Logs destination or Kinesis Data Firehose destination.
        
        CloudWatchLogsDetails (dict) –
        
        The configuration details of the CloudWatch Logs destination.
        
        LogGroup (string) –
        
        The name of the CloudWatch Logs log group.
        
        KinesisFirehoseDetails (dict) –
        
        The configuration details of the Kinesis Data Firehose destination.
        
        DeliveryStream (string) –
        
        The name of the Kinesis Data Firehose delivery stream.
        
        LogFormat (string) –
        
        Returns the log format, either JSON or TEXT
    - TransitEncryptionEnabled (boolean) –
      
      A flag that enables in-transit encryption when set to true.
    - TransitEncryptionMode (string) –
      
      A setting that allows you to migrate your clients to use in-transit encryption, with no downtime.
  - NotificationConfiguration (dict) –
    
    Describes a notification topic and its status. Notification topics are used for publishing ElastiCache events to subscribers using Amazon Simple Notification Service (SNS).
    - TopicArn (string) –
      
      The Amazon Resource Name (ARN) that identifies the topic.
    - TopicStatus (string) –
      
      The current state of the topic.
  - CacheSecurityGroups (list) –
    
    A list of cache security group elements, composed of name and status sub-elements.
    - (dict) –
      
      Represents a cluster’s status within a particular cache security group.
      - CacheSecurityGroupName (string) –
        
        The name of the cache security group.
      - Status (string) –
        
        The membership status in the cache security group. The status changes when a cache security group is modified, or when the cache security groups assigned to a cluster are modified.
  - CacheParameterGroup (dict) –
    
    Status of the cache parameter group.
    - CacheParameterGroupName (string) –
      
      The name of the cache parameter group.
    - ParameterApplyStatus (string) –
      
      The status of parameter updates.
    - CacheNodeIdsToReboot (list) –
      
      A list of the cache node IDs which need to be rebooted for parameter changes to be applied. A node ID is a numeric identifier (0001, 0002, etc.).
      - (string) –
  - CacheSubnetGroupName (string) –
    
    The name of the cache subnet group associated with the cluster.
  - CacheNodes (list) –
    
    A list of cache nodes that are members of the cluster.
    - (dict) –
      
      Represents an individual cache node within a cluster. Each cache node runs its own instance of the cluster’s protocol-compliant caching software - either Memcached or Redis.
      
      The following node types are supported by ElastiCache. Generally speaking, the current generation types provide more memory and computational power at lower cost when compared to their equivalent previous generation counterparts.
      - General purpose:
        
        Current generation: M6g node types (available only for Redis engine version 5.0.6 onward and for Memcached engine version 1.5.16 onward): cache.m6g.large, cache.m6g.xlarge, cache.m6g.2xlarge, cache.m6g.4xlarge, cache.m6g.8xlarge, cache.m6g.12xlarge, cache.m6g.16xlarge
        
        Note
        
        For region availability, see Supported Node Types
        
        M5 node types: cache.m5.large, cache.m5.xlarge, cache.m5.2xlarge, cache.m5.4xlarge, cache.m5.12xlarge, cache.m5.24xlarge M4 node types: cache.m4.large, cache.m4.xlarge, cache.m4.2xlarge, cache.m4.4xlarge, cache.m4.10xlarge T4g node types (available only for Redis engine version 5.0.6 onward and Memcached engine version 1.5.16 onward): cache.t4g.micro, cache.t4g.small, cache.t4g.medium T3 node types: cache.t3.micro, cache.t3.small, cache.t3.medium T2 node types: cache.t2.micro, cache.t2.small, cache.t2.medium
        
        Previous generation: (not recommended. Existing clusters are still supported but creation of new clusters is not supported for these types.) T1 node types: cache.t1.micro M1 node types: cache.m1.small, cache.m1.medium, cache.m1.large, cache.m1.xlarge M3 node types: cache.m3.medium, cache.m3.large, cache.m3.xlarge, cache.m3.2xlarge
      - Compute optimized:
        
        Previous generation: (not recommended. Existing clusters are still supported but creation of new clusters is not supported for these types.) C1 node types: cache.c1.xlarge
      - Memory optimized:
        
        Current generation: R6g node types (available only for Redis engine version 5.0.6 onward and for Memcached engine version 1.5.16 onward). cache.r6g.large, cache.r6g.xlarge, cache.r6g.2xlarge, cache.r6g.4xlarge, cache.r6g.8xlarge, cache.r6g.12xlarge, cache.r6g.16xlarge
        
        Note
        
        For region availability, see Supported Node Types
        
        R5 node types: cache.r5.large, cache.r5.xlarge, cache.r5.2xlarge, cache.r5.4xlarge, cache.r5.12xlarge, cache.r5.24xlarge R4 node types: cache.r4.large, cache.r4.xlarge, cache.r4.2xlarge, cache.r4.4xlarge, cache.r4.8xlarge, cache.r4.16xlarge
        
        Previous generation: (not recommended. Existing clusters are still supported but creation of new clusters is not supported for these types.) M2 node types: cache.m2.xlarge, cache.m2.2xlarge, cache.m2.4xlarge R3 node types: cache.r3.large, cache.r3.xlarge, cache.r3.2xlarge, cache.r3.4xlarge, cache.r3.8xlarge
      Additional node type info
      - All current generation instance types are created in Amazon VPC by default.
      - Redis append-only files (AOF) are not supported for T1 or T2 instances.
      - Redis Multi-AZ with automatic failover is not supported on T1 instances.
      - Redis configuration variables appendonly and appendfsync are not supported on Redis version 2.8.22 and later.
      - CacheNodeId (string) –
        
        The cache node identifier. A node ID is a numeric identifier (0001, 0002, etc.). The combination of cluster ID and node ID uniquely identifies every cache node used in a customer’s Amazon account.
      - CacheNodeStatus (string) –
        
        The current state of this cache node, one of the following values: available, creating, rebooting, or deleting.
      - CacheNodeCreateTime (datetime) –
        
        The date and time when the cache node was created.
      - Endpoint (dict) –
        
        The hostname for connecting to this cache node.
        
        Address (string) –
        
        The DNS hostname of the cache node.
        
        Port (integer) –
        
        The port number that the cache engine is listening on.
      - ParameterGroupStatus (string) –
        
        The status of the parameter group applied to this cache node.
      - SourceCacheNodeId (string) –
        
        The ID of the primary node to which this read replica node is synchronized. If this field is empty, this node is not associated with a primary cluster.
      - CustomerAvailabilityZone (string) –
        
        The Availability Zone where this node was created and now resides.
      - CustomerOutpostArn (string) –
        
        The customer outpost ARN of the cache node.
  - AutoMinorVersionUpgrade (boolean) –
    
    If you are running Redis engine version 6.0 or later, set this parameter to yes if you want to opt-in to the next auto minor version upgrade campaign. This parameter is disabled for previous versions.
  - SecurityGroups (list) –
    
    A list of VPC Security Groups associated with the cluster.
    - (dict) –
      
      Represents a single cache security group and its status.
      - SecurityGroupId (string) –
        
        The identifier of the cache security group.
      - Status (string) –
        
        The status of the cache security group membership. The status changes whenever a cache security group is modified, or when the cache security groups assigned to a cluster are modified.
  - ReplicationGroupId (string) –
    
    The replication group to which this cluster belongs. If this field is empty, the cluster is not associated with any replication group.
  - SnapshotRetentionLimit (integer) –
    
    The number of days for which ElastiCache retains automatic cluster snapshots before deleting them. For example, if you set SnapshotRetentionLimit to 5, a snapshot that was taken today is retained for 5 days before being deleted.
    
    Warning
    
    If the value of SnapshotRetentionLimit is set to zero (0), backups are turned off.
  - SnapshotWindow (string) –
    
    The daily time range (in UTC) during which ElastiCache begins taking a daily snapshot of your cluster.
    
    Example: 05:00-09:00
  - AuthTokenEnabled (boolean) –
    
    A flag that enables using an AuthToken (password) when issuing Redis commands.
    
    Default: false
  - AuthTokenLastModifiedDate (datetime) –
    
    The date the auth token was last modified
  - TransitEncryptionEnabled (boolean) –
    
    A flag that enables in-transit encryption when set to true.
    
    Required: Only available when creating a replication group in an Amazon VPC using redis version 3.2.6, 4.x or later.
    
    Default: false
  - AtRestEncryptionEnabled (boolean) –
    
    A flag that enables encryption at-rest when set to true.
    
    You cannot modify the value of AtRestEncryptionEnabled after the cluster is created. To enable at-rest encryption on a cluster you must set AtRestEncryptionEnabled to true when you create a cluster.
    
    Required: Only available when creating a replication group in an Amazon VPC using redis version 3.2.6, 4.x or later.
    
    Default: false
  - ARN (string) –
    
    The ARN (Amazon Resource Name) of the cache cluster.
  - ReplicationGroupLogDeliveryEnabled (boolean) –
    
    A boolean value indicating whether log delivery is enabled for the replication group.
  - LogDeliveryConfigurations (list) –
    
    Returns the destination, format and type of the logs.
    - (dict) –
      
      Returns the destination, format and type of the logs.
      - LogType (string) –
        
        Refers to slow-log or engine-log.
      - DestinationType (string) –
        
        Returns the destination type, either cloudwatch-logs or kinesis-firehose.
      - DestinationDetails (dict) –
        
        Configuration details of either a CloudWatch Logs destination or Kinesis Data Firehose destination.
        
        CloudWatchLogsDetails (dict) –
        
        The configuration details of the CloudWatch Logs destination.
        
        LogGroup (string) –
        
        The name of the CloudWatch Logs log group.
        
        KinesisFirehoseDetails (dict) –
        
        The configuration details of the Kinesis Data Firehose destination.
        
        DeliveryStream (string) –
        
        The name of the Kinesis Data Firehose delivery stream.
      - LogFormat (string) –
        
        Returns the log format, either JSON or TEXT.
      - Status (string) –
        
        Returns the log delivery configuration status. Values are one of enabling | disabling | modifying | active | error
      - Message (string) –
        
        Returns an error message for the log delivery configuration.
  - NetworkType (string) –
    
    Must be either ipv4 | ipv6 | dual_stack. IPv6 is supported for workloads using Redis engine version 6.2 onward or Memcached engine version 1.6.6 on all instances built on the Nitro system.
  - IpDiscovery (string) –
    
    The network type associated with the cluster, either ipv4 | ipv6. IPv6 is supported for workloads using Redis engine version 6.2 onward or Memcached engine version 1.6.6 on all instances built on the Nitro system.
  - TransitEncryptionMode (string) –
    
    A setting that allows you to migrate your clients to use in-transit encryption, with no downtime.

Exceptions

ElastiCache.Client.exceptions.InvalidCacheClusterStateFault
ElastiCache.Client.exceptions.InvalidCacheSecurityGroupStateFault
ElastiCache.Client.exceptions.InsufficientCacheClusterCapacityFault
ElastiCache.Client.exceptions.CacheClusterNotFoundFault
ElastiCache.Client.exceptions.NodeQuotaForClusterExceededFault
ElastiCache.Client.exceptions.NodeQuotaForCustomerExceededFault
ElastiCache.Client.exceptions.CacheSecurityGroupNotFoundFault
ElastiCache.Client.exceptions.CacheParameterGroupNotFoundFault
ElastiCache.Client.exceptions.InvalidVPCNetworkStateFault
ElastiCache.Client.exceptions.InvalidParameterValueException
ElastiCache.Client.exceptions.InvalidParameterCombinationException

Examples

Copies a snapshot to a specified name.

response = client.modify_cache_cluster(
    ApplyImmediately=True,
    CacheClusterId='redis-cluster',
    SnapshotRetentionLimit=14,
)

print(response)

Expected Output:

{
    'CacheCluster': {
        'AutoMinorVersionUpgrade': True,
        'CacheClusterCreateTime': datetime(2016, 12, 22, 16, 27, 56, 3, 357, 0),
        'CacheClusterId': 'redis-cluster',
        'CacheClusterStatus': 'available',
        'CacheNodeType': 'cache.r3.large',
        'CacheParameterGroup': {
            'CacheNodeIdsToReboot': [
            ],
            'CacheParameterGroupName': 'default.redis3.2',
            'ParameterApplyStatus': 'in-sync',
        },
        'CacheSecurityGroups': [
        ],
        'CacheSubnetGroupName': 'default',
        'ClientDownloadLandingPage': 'https://console.aws.amazon.com/elasticache/home#client-download:',
        'Engine': 'redis',
        'EngineVersion': '3.2.4',
        'NumCacheNodes': 1,
        'PendingModifiedValues': {
        },
        'PreferredAvailabilityZone': 'us-east-1e',
        'PreferredMaintenanceWindow': 'fri:09:00-fri:10:00',
        'SnapshotRetentionLimit': 14,
        'SnapshotWindow': '07:00-08:00',
    },
    'ResponseMetadata': {
        '...': '...',
    },
}